Skip to content

Filters

Drill Bits and Drilling

  • Diamond Core Drill Bit Concrete for Portable Hand Held Drills 52mm Dia x 160mm Length - 1/2" BSP Fittings
    $89.50

    Diamond Core Drill Bit Concrete for Portable Hand Held Drills 52mm Dia x 160mm Length - 1/2" BSP Fittings

    ConFit Australia

    Rated to cut reinforced concrete & brick.  ½” BSP fitting and 12mm long (high) diamond segments.  These core drill bits can be fitted to a rang...

    View full details
    $89.50
  • Diamond Core Drill Bit Concrete for Portable Hand Held Drills 80mm Dia x 160mm Length - 1/2" BSP Fittings
    $122.50

    Diamond Core Drill Bit Concrete for Portable Hand Held Drills 80mm Dia x 160mm Length - 1/2" BSP Fittings

    ConFit Australia

    Rated to cut reinforced concrete & brick.  ½” BSP fitting and 12mm long (high) diamond segments.  These core drill bits can be fitted to a rang...

    View full details
    $122.50
  • Diamond Core Drill Kit Rated to Cut Concrete - Brick, Fibre Cement. Granite etc
    $463.50

    Diamond Core Drill Kit Rated to Cut Concrete - Brick, Fibre Cement. Granite etc

    ConFit Australia

    These core drills and will cut all materials including concrete, brick, compressed fibre cement board, granite, and other masonry type building mat...

    View full details
    $463.50
  • 8 Piece HSS Hole Saw Kit for Cutting Metal
    $299.00

    8 Piece HSS Hole Saw Kit for Cutting Metal

    ConFit Australia

    ELECTRICAL: HVAC: DATA CABELING: PLUMBING This 8 piece kit is manufactured from the same high grade M2 H.S.S. steel as the HMHT range.  Each hole s...

    View full details
    $299.00
  • HSS Hole Saw for Sheet Metal - 63mm Diameter - M2 Grade Metal Strut Hole Cutting
    $75.95

    HSS Hole Saw for Sheet Metal - 63mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $75.95
  • HSS Hole Saw for Sheet Metal - 58mm Diameter - M2 Grade Metal Strut Hole Cutting
    $70.50

    HSS Hole Saw for Sheet Metal - 58mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $70.50
  • HSS Hole Saw for Sheet Metal - 51mm Diameter - M2 Grade Metal Strut Hole Cutting
    $66.50

    HSS Hole Saw for Sheet Metal - 51mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $66.50
  • HSS Hole Saw for Sheet Metal -44mm Diameter - M2 Grade Metal Strut Hole Cutting
    $64.95

    HSS Hole Saw for Sheet Metal -44mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $64.95
  • HSS Hole Saw for Sheet Metal - 40mm Diameter - M2 Grade Metal Strut Hole Cutting
    $63.95

    HSS Hole Saw for Sheet Metal - 40mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $63.95
  • HSS Hole Saw for Sheet Metal -37mm Diameter - M2 Grade Metal Strut Hole Cutting
    $61.00

    HSS Hole Saw for Sheet Metal -37mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $61.00
  • HSS Hole Saw for Sheet Metal -35mm Diameter - M2 Grade Metal Strut Hole Cutting
    $60.50

    HSS Hole Saw for Sheet Metal -35mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $60.50
  • HSS Hole Saw for Sheet Metal -34mm Diameter - M2 Grade Metal Strut Hole Cutting
    $56.95

    HSS Hole Saw for Sheet Metal -34mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $56.95
  • HSS Hole Saw for Sheet Metal -32mm Diameter - M2 Grade Metal Strut Hole Cutting
    $55.50

    HSS Hole Saw for Sheet Metal -32mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $55.50
  • HSS Hole Saw for Sheet Metal -28mm Diameter - M2 Grade Metal Strut Hole Cutting
    $46.95

    HSS Hole Saw for Sheet Metal -28mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $46.95
  • HSS Hole Saw for Sheet Metal -26mm Diameter - M2 Grade Metal Strut Hole Cutting
    $45.50

    HSS Hole Saw for Sheet Metal -26mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $45.50
  • HSS Hole Saw for Sheet Metal -25mm Diameter - M2 Grade Metal Strut Hole Cutting
    $40.95

    HSS Hole Saw for Sheet Metal -25mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $40.95
  • HSS Hole Saw for Sheet Metal -22mm Diameter - M2 Grade Metal Strut Hole Cutting
    $38.00

    HSS Hole Saw for Sheet Metal -22mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $38.00
  • HSS Hole Saw for Sheet Metal -18mm Diameter - M2 Grade Metal Strut Hole Cutting
    $31.00

    HSS Hole Saw for Sheet Metal -18mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $31.00
  • HSS Hole Saw for Sheet Metal -16mm Diameter - M2 Grade Metal Strut Hole Cutting
    $27.95

    HSS Hole Saw for Sheet Metal -16mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $27.95
  • Replacement Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals
    $2.50

    Replacement Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals

    ConFit Australia

    SPARE PARTS ONLY Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill b...

    View full details
    $2.50
  • Replacement Pilot Drill with Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals
    $8.95

    Replacement Pilot Drill with Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals

    ConFit Australia

    SPARE PARTS ONLY Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill b...

    View full details
    $8.95
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals
    $350.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $350.00
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -86mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals
    $335.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -86mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $335.00
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -64mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals
    $225.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -64mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $225.00