Skip to content

Filters

Drill Bits and Drilling

  • Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT
    $34.85

    Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT

    ConFit Australia

    A - 19mm B - 16mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits. ...

    View full details
    $34.85
  • Edge & Face Forming Bit Top Bearing- V Lettering - 1/2" Shank - TruaCut
    $82.66

    Edge & Face Forming Bit Top Bearing- V Lettering - 1/2" Shank - TruaCut

    ConFit Australia

    A 28.0mm  B 19.0mm 1/2" Shank This bit has a 10mm flat on the point for large top bearing guided signage

    $82.66
  • Edge & Face Forming Bit Top Bearing- 5.5mm Provincial Plunge Top Guide - TruaCut
    $53.36

    Edge & Face Forming Bit Top Bearing- 5.5mm Provincial Plunge Top Guide - TruaCut

    ConFit Australia

    A 35.0mm  B 14.3mm Radius 5.5mm Surface groove can be widened to give better proportional groove to the face of the job.

    $53.36
  • Edge & Face Forming Bit Top Bearing- 3.2mm Provincial Plunge Top Guide - TruaCut
    $49.00

    Edge & Face Forming Bit Top Bearing- 3.2mm Provincial Plunge Top Guide - TruaCut

    ConFit Australia

    A 22.0mm  B 9.9mm Radius 3.2mm Surface groove can be widened to give better proportional groove to the face of the job.

    $49.00
  • Edge & Face Forming Bit Top Bearing- 6.4mm Classical Plunge Top Guide - TruaCut
    $53.36

    Edge & Face Forming Bit Top Bearing- 6.4mm Classical Plunge Top Guide - TruaCut

    ConFit Australia

    A 35.0mm  B 14.3mm Rad 1 6.4mm Rad 2 10.0mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cut...

    View full details
    $53.36
  • Edge & Face Forming Bit Top Bearing- 4mm Classical Plunge Top Guide - TruaCut
    $50.09

    Edge & Face Forming Bit Top Bearing- 4mm Classical Plunge Top Guide - TruaCut

    ConFit Australia

    A 22.0mm  B 12.7mm Rad 1 4.0mm Rad 2 5.5mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cutt...

    View full details
    $50.09
  • Edge & Face Forming Bit Top Bearing- 12mm Core Box - TruaCut
    $50.09

    Edge & Face Forming Bit Top Bearing- 12mm Core Box - TruaCut

    ConFit Australia

    A 12.7mm  B 12.7mm  Surface reeding and lettering using top template

    $50.09
  • Edge & Face Forming Bit Top Bearing- Inverted Down Shear Flush Trim - 1/2" Shank - TruaCut
    $41.38

    Edge & Face Forming Bit Top Bearing- Inverted Down Shear Flush Trim - 1/2" Shank - TruaCut

    ConFit Australia

    A 19.0mm  B 38.1mm 1/2" Shank Specifically designed for heavy duty, fast, clean cutting which gives a superior finish with  minimal chipping to to...

    View full details
    $41.38
  • Edge & Face Forming Bit Top Bearing- 19mm Inverted Flush Trim - 1/2" Shank - Extra Long TruaCut
    $53.91

    Edge & Face Forming Bit Top Bearing- 19mm Inverted Flush Trim - 1/2" Shank - Extra Long TruaCut

    ConFit Australia

    A 19.0mm  B 50.0mm

    $53.91
  • Edge & Face Forming Bit Top Bearing- 28.6mm Inverted Flush Trim - 1/2" Shank - TruaCut
    $70.78

    Edge & Face Forming Bit Top Bearing- 28.6mm Inverted Flush Trim - 1/2" Shank - TruaCut

    ConFit Australia

    A 28.6mm  B 38.0mm

    $70.78
  • Edge & Face Forming Bit Top Bearing- 16mm Inverted Flush Trim - TruaCut
    $34.85

    Edge & Face Forming Bit Top Bearing- 16mm Inverted Flush Trim - TruaCut

    ConFit Australia

    A 16.0mm  B 25.4mm

    $34.85
  • Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - Hinge Setting Bit - TruaCut
    $32.57

    Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - Hinge Setting Bit - TruaCut

    ConFit Australia

    A 12.7mm  B 9.5mm

    $32.57
  • Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - TruaCut
    $31.58

    Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - TruaCut

    ConFit Australia

    A 12.7mm  B 25.4mm

    $31.58
  • Edge & Face Forming Bit - Router Bits - 11mm Surface Classical Round Nose - TruaCuT
    $65.34

    Edge & Face Forming Bit - Router Bits - 11mm Surface Classical Round Nose - TruaCuT

    ConFit Australia

    Radius - 5.5mm A - 25.4mm B - 16.0mm

    $65.34
  • Edge & Face Forming Bit - Router Bits - 8mm Surface Classical Round Nose - TruaCuT
    $63.16

    Edge & Face Forming Bit - Router Bits - 8mm Surface Classical Round Nose - TruaCuT

    ConFit Australia

    Radius - 4.0mm A - 19.0mm B - 12.7mm

    $63.16
  • Edge & Face Forming Bit - Router Bits - 4.8mm Surface Classical Round Nose - TruaCuT
    $59.89

    Edge & Face Forming Bit - Router Bits - 4.8mm Surface Classical Round Nose - TruaCuT

    ConFit Australia

    Radius - 2.4mm A - 12.7mm B - 9.5mm

    $59.89
  • Edge & Face Forming Bits - Router Bit - 6.4mm x 25mmBroad/Wide Point Beading Bit - TruaCuT
    $64.25

    Edge & Face Forming Bits - Router Bit - 6.4mm x 25mmBroad/Wide Point Beading Bit - TruaCuT

    ConFit Australia

    Point 12.7mm Radius 6.4mm  A 25.4mm  B 19.0mm  Broad/Wide point beading  Can plunge and cut into the surface

    $64.25
  • Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit Flat Bottom- TruaCuT
    $58.81

    Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit Flat Bottom- TruaCuT

    ConFit Australia

    Point 12.7mm Radius 3.2mm  A 19.0mm  B 11.1mm - Flat Bottom Broad/Wide point beading  Can plunge and cut into the surface

    $58.81
  • Edge & Face Forming Bits - Router Bit - 6.4mm Broad/Wide Point Beading Bit - TruaCuT
    $59.89

    Edge & Face Forming Bits - Router Bit - 6.4mm Broad/Wide Point Beading Bit - TruaCuT

    ConFit Australia

    Point 3.2mm Radius 6.4mm  A 16.0mm  B 12.7mm Broad/Wide point beading  Can plunge and cut into the surface

    $59.89
  • Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit - TruaCuT
    $54.45

    Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit - TruaCuT

    ConFit Australia

    Point 3.2mm Radius 3.2mm  A 9.5mm  B 9.5mm Broad/Wide point beading  Can plunge and cut into the surface

    $54.45
  • Edge & Face Forming Bit - 60o V Grooving Router Bit - 1/2" Shank - TruaCuT
    $41.38

    Edge & Face Forming Bit - 60o V Grooving Router Bit - 1/2" Shank - TruaCuT

    ConFit Australia

    60o V Grooving Bits   1/2" Shank Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and general ...

    View full details
    $41.38
  • TruaCut Edge and Face Forming Bits - 25.4mm Ball / Rope Track Bit
    $74.05

    TruaCut Edge and Face Forming Bits - 25.4mm Ball / Rope Track Bit

    ConFit Australia

       Designed to plunge and cut an open top ball track after using a straight cutter to relieve the centre just larger than the shank size of the tra...

    View full details
    $74.05
  • TruaCut Edge and Face Forming Bits - 6.4mm Bead and Flute Bit - Used for Roll Top Desks
    $99.09

    TruaCut Edge and Face Forming Bits - 6.4mm Bead and Flute Bit - Used for Roll Top Desks

    ConFit Australia

      Sectional edge moulding and used extensively for male and female sections of Roll Top desks.   A 25.4mm  B 16.0mm  Radius 3.2mm  

    $99.09
  • TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Wide Point
    $74.05

    TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Wide Point

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Wide Point Used to rout the face of panel doors etc A 38.0mm  B 19.0mm  Radius 6.5mm  E 13.0mm

    $74.05