Skip to content

Drill Bits and Drilling

  • Masonry Hole Saws Tungsten Carbide Tip for Brick and Masonry -  Air Con Kit Adaptor and 65mm Bit
    $70.00

    Masonry Hole Saws Tungsten Carbide Tip for Brick and Masonry - Air Con Kit Adaptor and 65mm Bit

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

    View full details
    $70.00
  • Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 220mm Long M22 Thread
    $25.00

    Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 220mm Long M22 Thread

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

    View full details
    $25.00
  • Core Drill Accessories - Adaptor HEX 85mm Long 1/2" BSP  Thread - Widest Diameter 25mm
    $31.18

    Core Drill Accessories - Adaptor HEX 85mm Long 1/2" BSP Thread - Widest Diameter 25mm

    ConFit Australia

    This is the range of accessories needed to attach all short series core drill bits onto the power drill including CCSB and CBTB ranges and any prod...

    View full details
    $31.18
  • Turbo Diamond Core Drill Bit for Brick 1/2" BSP 65mm Dia x 160mm Length
    $88.35

    Turbo Diamond Core Drill Bit for Brick 1/2" BSP 65mm Dia x 160mm Length

    ConFit Australia

    Tips to prevent damage to the diamond segments –  do not operate on hammer action, do not force the speed of the cut, some bricks are harder and de...

    View full details
    $88.35
  • 80mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $62.00

    80mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

    View full details
    $62.00
  • Drill Guide with Suction Cup
    $19.76

    Drill Guide with Suction Cup

    ConFit Australia

    For accurate hole positioning. Clamps to all smooth surfaces. 4, 5, 6, 7, 8, 10,& 12mm dia. With water reservoir.

    $19.76
  • Jointing Bits - 6.4mm Tongue and Groove Set - 1/4" Shank - TruaCut
    $96.39

    Jointing Bits - 6.4mm Tongue and Groove Set - 1/4" Shank - TruaCut

    ConFit Australia

    A 9.5mm  B6.4mm Capacity 19.0mm When using this set you produce the tongue with the two cutters and to produce the groove  you just take off one of...

    View full details
    $96.39
  • Diamond Electroplated Hole Saw 90 mm Diameter
    $17.00

    Diamond Electroplated Hole Saw 90 mm Diameter

    ConFit Australia

    Target use is for porcelain, pottery tiles, granite, marble, slate, travertine, blue stone, fiberglass, polycarbonates and fiber cement sheet. This...

    View full details
    $17.00
  • Core Drill Accessories - Adaptor SDS MAX 250mm 1/2" BSP Thread Widest Diameter 27mm
    $48.87

    Core Drill Accessories - Adaptor SDS MAX 250mm 1/2" BSP Thread Widest Diameter 27mm

    ConFit Australia

    Use this SDS-MAX adaptor rod with CCSB diamond core drills larger than 80mm in diameter.   This is the range of accessories needed to attach all sh...

    View full details
    $48.87
  • Turbo Diamond Core Drill Bit for Brick 1/2" BSP 38mm Dia x 160mm Length
    $52.87

    Turbo Diamond Core Drill Bit for Brick 1/2" BSP 38mm Dia x 160mm Length

    ConFit Australia

    Tips to prevent damage to the diamond segments –  do not operate on hammer action, do not force the speed of the cut, some bricks are harder and de...

    View full details
    $52.87
  • HSS Hole Saw for Sheet Metal -20mm Diameter - M2 Grade Metal Strut Hole Cutting
    $32.33

    HSS Hole Saw for Sheet Metal -20mm Diameter - M2 Grade Metal Strut Hole Cutting

    ConFit Australia

    M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

    View full details
    $32.33
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -60mm Diameter - Steel, Iron, Stainless Steel
    $83.38

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -60mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $83.38
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -26mm Diameter - Steel, Iron, Stainless Steel
    $36.17

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -26mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $36.17
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -25mm Diameter - Steel, Iron, Stainless Steel
    $38.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -25mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $38.95
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -22mm Diameter - Steel, Iron, Stainless Steel
    $30.57

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -22mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $30.57
  • Ceramic Tile & Glass Drill Bit 4.5mm Dia Tungsten Carbide Tipped Spear Head
    $6.00

    Ceramic Tile & Glass Drill Bit 4.5mm Dia Tungsten Carbide Tipped Spear Head

    ConFit Australia

     For use with ceramic tiles.  Use water lubricant, apply only medium drilling pressure and use lower drilling speeds

    $6.00
  • Ceramic Tile & Glass Drill Bit 11mm Dia Tungsten Carbide Tipped Spear Head
    $12.00

    Ceramic Tile & Glass Drill Bit 11mm Dia Tungsten Carbide Tipped Spear Head

    ConFit Australia

     For use with ceramic tiles.  Use water lubricant, apply only medium drilling pressure and use lower drilling speeds

    $12.00
  • Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 350mm Long M22 Thread
    $45.00

    Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 350mm Long M22 Thread

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

    View full details
    $45.00
  • 65mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $46.00

    65mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

    View full details
    $46.00
  • 115mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $97.00

    115mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

    View full details
    $97.00
  • Router Bit Ball Bearings Outside Dia 19mm Inside Dia 12.7 - TruaCut
    $8.02

    Router Bit Ball Bearings Outside Dia 19mm Inside Dia 12.7 - TruaCut

    ConFit Australia

    TruaCut Router Bit Ball Bearing  A - 19mm B  12.7mm

    $8.02
  • Router Bits - Edge Forming Bits - 32mm Rounding Over Bit 1/2" Shank TruaCuT
    $125.23

    Router Bits - Edge Forming Bits - 32mm Rounding Over Bit 1/2" Shank TruaCuT

    ConFit Australia

    Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

    View full details
    $125.23
  • Router Bits - Edge Forming Bits - 19mm Rounding Over Bit 1/2" Shank TruaCuT
    $56.63

    Router Bits - Edge Forming Bits - 19mm Rounding Over Bit 1/2" Shank TruaCuT

    ConFit Australia

    Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

    View full details
    $56.63
  • Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT
    $34.85

    Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT

    ConFit Australia

    A - 19mm B - 16mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits. ...

    View full details
    $34.85