The Tank Level Pro Bluetooth level sensor is an excellent choice for those looking for an accurate, easy-to-install water tank level sensor. The sensor fits tanks of all sizes and is made of industrial grade material, making it a versatile option for all water tank applications. The Bluetooth level sensor has a working range of fifty meters and with a battery life of 36 months, you can be confident that the sensor will provide reliable level readings for an extended period. In addition, the Tank Level Pro Bluetooth level sensor comes with a 12-month warranty, ensuring that you will be fully satisfied with your purchase.
The Tank Level Pro BT App is essential for anyone who wants to keep track of their water tank level. With a simple set-up procedure, you will be able to see your water tank level in a matter of minutes. The app also has some excellent features, such as water tank level historical charts, water tank leakage detection and water tank estimated time to empty. You will be amazed at how quick and simple the process is, with all your water tank information displayed in a user-friendly format. So don’t wait any longer, download the Tank Level Pro BT App today!
Installation
For Sealed Tanks (Drilling Required)
- Drill a 20mm hole into the top of the water tank lid, ensuring that the lid is open to avoid debris going into the tank
- If there is no water tank lid, inspection hatch, or any access to the internal of the tank, a 32mm hole can be drilled and the transducer lowered into the tank through the hole
- Pull the transducer cable plug back through the hole, with the stainless-steel transducer in the tank, and secure the grommet around the cable. Place rubber grommet into the hole to seal. The grommet suits both 20mm and 32mm holes
- Secure the plug into the Tank Level Pro, ensuring that the location tab and pins are aligned on the plug and socket
- Tighten the securing screw on to the socket
- Open the battery compartment and remove the insulation tabs to connect the battery
- Secure the Tank Level Pro on the outside of the water tank with inbuilt magnets or the Velcro
- Download the App from the iOS or Android Play Store, searching for tanklvlpro
- App setup is simple, but further instructions can be found by following the QR Code below
For Corrugated Tanks (No Drilling Required)
- Place stainless steel transducer into tank and thread plug through the corrugation in the tank roof. In some instances, the transducer plug may not fit through the corrugations, and a screw may have to be loosened, this can be re-tightened once the plug is through
- Follow steps 4 to 9 for Sealed Tanks
Revised 26/04/2025