Grinding and Cutting

Double edge for all 82mm portable power planers that are fitted with blade adapters   Revised 6/07/2025  

 110mm x 20 Teeth with a 22.2/16 Bore  Diameter suits most popular angle grinders and small saws designed to cut:  thin steel, aluminium, c...

Wire Wheel Crimped 50mm x 6mm shaft. 7mm Wire Brush Thickness CRIMPED WIRE WHEELS Crimped wire wheels are less aggressive than twist knot brushes. ...

These thin profile blades provide absolute minimal surface chipping and reduced cutting friction. Suitable for hard porcelain and other tile materi...

Revised 14/04/2026

TruaCut Multi Tool Blade - Suits 99% of Multi Tools 90mm Hook & Loop  Sand Paper 120 Grit  (See Separate Listings for Other Sizes)   Revised 23...

TruaCut Multi Tool Blade - Suits 99% of Multi Tools Carbide Grit Grout Removal Ideal for Long Cuts Grout Eater 88mm Dia Segment Blade   Revised 18/...

TruaCut Multi Tool Blade - Suits 99% of Multi Tools Bi Metal - For Longer Life 3 Piece Pack - Note Photo is of ONE Piece ONLY  Plunge Cut Ideal for...

AGCDM160 This model represents the base line machine for the majority of Trade requirements.  As a heavy duty core drill machine it can be rig moun...

Use this SDS-MAX adaptor rod with CCSB diamond core drills larger than 80mm in diameter.   This is the range of accessories needed to attach all sh...

This is the range of accessories needed to attach all short series core drill bits onto the power drill including CCSB and CBTB ranges and any prod...

1/2" BSP Fitting    This is the range of accessories needed to attach all short series core drill bits onto the power drill including CCSB and CBTB...

Tips to prevent damage to the diamond segments –  do not operate on hammer action, do not force the speed of the cut, some bricks are harder and de...

Rated to cut reinforced concrete & brick.  ½” BSP fitting and 12mm long (high) diamond segments.  These core drill bits can be fitted to a rang...

Rated to cut reinforced concrete & brick.  ½” BSP fitting and 12mm long (high) diamond segments.  These core drill bits can be fitted to a rang...

Rated to cut reinforced concrete & brick.  ½” BSP fitting and 12mm long (high) diamond segments.  These core drill bits can be fitted to a rang...

M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

For Aluminium milling, grooving, cutting and weld preparation. Hardened steel blade body. Premium tungsten carbide cutting tips.   Revised 3/05/2026

Replacement Carbon Steel Cutters  (2 per pack) for  Hole Saw Kits AHS220K & AHS300K   Replacement high carbon steel blade set. Suitable for cu...

Fully heat treated high carbon steel.  Edge cutting spurs.  Ground cutting edges.  Quick change hex shank.  Comprehensive range with extension rods...

External Thread M22 x 2.0     Revised 3/04/2026

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry.  M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods sh...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry.  M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

NOTE : REPLACEMENT PILOT BIT ONLY TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor.  Internal...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods ...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

Revised 19/01/2026

Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...