Dymaxion Core Drilling Machine 2200 Watt Rig Mounted 1 1/4" UNC Spindle AGCDM250

This machine with a powerful 2200W motor and contemporary gear ratio engineering enables it to drill up to 250mm in reinforced concrete and weighs 25.3KG.

 Fitted with electronic overload protection, three drilling speeds, built in bubble levels, water swivel, R.C.D. protection and is supplied ready attached to the rig.

 Concrete core drilling requires a great deal of torque force particularly when drilling through steel reinforcing rods, additionally floors 300mm thick are not uncommon so these are all practical reasons to consider this machine favorably with its adequate power of 2200 watts. 

It is supplied and only operated on the core drill rig as illustrated. 

This rig has many benefits and offers stability with minimum vibration, the rig can also angle down to 45˚. 

When choosing a core drill machine there are two main factors to consider,

 firstly what are the largest diameter holes typically required and is hand held drilling a requirement? 

Diamond core drill machines are rated for the largest core they can cut either as hand held or mounted on a core drill stand (rig). 

After this decision is made then choosing a machine is clear and straight forward.

 Drilling larger diameters in concrete requires a core drill stand but if only drilling in brick or soft materials then hand held is acceptable.

 * Please note that reconstituted limestone is classed as a concrete product. 

Models Available *AGCDM80 intended for hand held up to 100mm dia in brick and small diameter concrete core drilling. * PCD17000 HH used for hand held drilling up to133m dia in brick or rig mounted 90mm in concrete. *AGCDM160 is versatile as it is hand held up to 200mm dia in brick or rig mounted 160mm in concrete. 

Revised 4/05/2024