Skip to content

4" (100mm) PVC SWING CHECK VALVE SLIP

$137.95

PVC Pressure Fittings are used extensively in irrigation, pool and spa filters and pump applications for fluid transfer to join PVC-U Class 18 pipe. There are a large range of sizes and configurations available to cover most types of installation. All fittings require solvent weld (Type P) as per manufacturer’s instructions for a pressurised system. Generally they are installed below ground, but if installed above ground they may require acrylic paint to mask the effects of UVB irradiance. Adequate pipe support or thrust blocks may be necessary depending on the situation. All PVC-U fittings are electrically non-conductive, and don’t require corrosion protection in aggressive environments.

 

 

WaterMark Approved - Meets WaterMark standards.

Non-Corrosive - Constructed from non-corrosive materials.

Electrically Non-Conductive - Will not conduct electricity.

Potable Water Standard - Manufactured from materials that meet potable water standards.

 • Pressure rating: 1800kPA*.

• Temperature rating: 1°C - 60°C.

* Slip fittings pressure rating: 1500kPA (80 - 100mm)

• Watermark Approved – AS/NZS 1477:2006.

• Complies to AS/NZS 4020 for effect on Potable Water.

Applications • Irrigation. • Pool. • Spa. • Pump. • Fluid transfer.

Installation • Requires Solvent Weld (Type P) as per manufacturers instructions for a pressurised system

 Revised 5/12/2024