Drill Bits and Drilling

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry.  M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

This is the range of accessories needed to attach all short series core drill bits onto the power drill including CCSB and CBTB ranges and any prod...

A 9.5mm  B6.4mm Capacity 19.0mm When using this set you produce the tongue with the two cutters and to produce the groove  you just take off one of...

Tips to prevent damage to the diamond segments –  do not operate on hammer action, do not force the speed of the cut, some bricks are harder and de...

            Tungsten Carbide Glass and Tile Drill. These drills are designed for drilling glass, tile and other hard, brittle materials. The t...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

Water feed Drilling Template with Suction. Drilling Template 4-13mm. Heavy duty drilling template fixes securely to any smooth surface  with a sim...

The Dymaxion SDS Plus masonry drill range drill faster and last longer than standard two edged rotary hammer bits. The single piece* 4 edge tungste...

Target use is for porcelain, pottery tiles, granite, marble, slate, travertine, blue stone, fiberglass, polycarbonates and fiber cement sheet. This...

AGCDM160 This model represents the base line machine for the majority of Trade requirements.  As a heavy duty core drill machine it can be rig moun...

Use this SDS-MAX adaptor rod with CCSB diamond core drills larger than 80mm in diameter.   This is the range of accessories needed to attach all sh...

This is the range of accessories needed to attach all short series core drill bits onto the power drill including CCSB and CBTB ranges and any prod...

Tips to prevent damage to the diamond segments –  do not operate on hammer action, do not force the speed of the cut, some bricks are harder and de...

Rated to cut reinforced concrete & brick.  ½” BSP fitting and 12mm long (high) diamond segments.  These core drill bits can be fitted to a rang...

M2 grade H.S.S.  Suits sheet metals up to 4mm thickness.  Ideal for metal strut hole cutting.  Split point pilot HSS drill bit with spring ejector....

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

Fully heat treated high carbon steel.  Edge cutting spurs.  Ground cutting edges.  Quick change hex shank.  Comprehensive range with extension rods...

        Tungsten Carbide Glass and Tile Drill. These drills are designed for drilling glass, tile and other hard, brittle materials. The tungst...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry.  M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods sh...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

A 50.0mm  Capacity 9-20 Thick 1/2" Shank This Mitre Lock bit will make a locking joint at 90º or in a straight line.  It is recommended that a jig ...

A 12.7mm  B 25.4mm  These precision flush trim bits are specifically designed for heavy duty trimming.  The smaller diameter bits are used for trim...

TruaCut Router Bit Ball Bearing  A - 19mm B  12.7mm   Revised 12/05/2024    

Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

A - 19mm B - 16mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits. ...

Used to enlarge an existing hole. Outside diamond coated length is 25mm with 10mm HEX shank. Insert into existing hole attached to a battery or p...

8 drills in vinyl roll kit. Set contains: 4.5 x 110, 5.0 x 110, 5.5 x 110, 6.0 x 160, 6.5 x 110, 6.5 x 160, 8.0   SDS Plus Masonry Drill Set conta...

8 drills in polyester roll kit Set contains: 5.5 x160, 6.5 x160, 10 x 160, 12 x 260, 16 x 450, 20 x 350, 22 x 260, 26 x 450   SDS Plus Masonry Dri...