Drill Bits and Drilling

A 54.0mm  B 50.8 C 96.8110.0 Profile on top of rail can be varied using a half bull nose bit up or down. With ball Bearing Guide, 12.7mm (1/2') SHA...

A 58.7mm  B 38.7 C 96.8mm  Profile on top of rail can be varied using a half bull nose bit up or down.  With ball Bearing Guide, 12.7mm (1/2') SHAN...

A 50.8mm  B 57.1 C 116.0mm  This bit will produce an attractive and functional hand rail for balustrades.  It can be used in conjunction with the h...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 41.0mm  B 13.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon th...

A 60.0mm  B 16.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon t...

A 72.0mm  B 16.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon t...

A 72.0mm  B 16.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon th...

A 70.0mm  B 16.0mm Radius 16.0mm Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller dep...

A 25.4mm  B 43.0mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 27.0mm  B 41.5mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 35.0mm  B 41.5mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 25.4mm  B 35.0mm  Radius 4.0mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 24.0mm  B 35.0mm  Radius 4.0mm All 1/2 x 38mm shk Face moulding bits are used extensively for the moulding of skirting boards,  picture frames, ...

A 35.0mm  B 38.0mm  Radius 4.8mm Flat edge mould for furniture or table edge    Revised 9/05/2024

A 50.8mm  B 29.2mm  C 89.0mm Radius 1 8.0mm Radius B 16.0mm This bit has a return to round over bottom of table for an attractive finish.  With ba...

A 51.0mm  B 25.4mm  Radius 6.4mm  Mainly table edge usage giving full beaded return with or with out a step on the bottom edge Revised 6/05/2024

A 50.8mm  B 18.3mm C 79.0mm Radius 1 8.0mm Radius 2 16.0mm A Popular bit for finishing table edges, With ball bearing guide, 12.7mm (1/2") SHANK. ...

A 40.0mm  B 30.0mm Radius 3.2mm Used for crowning furniture and table edging    Revised 6/05/2024

A 28.0mm  B 19.0mm 1/2" Shank This bit has a 10mm flat on the point for large top bearing guided signage Revised 6/05/2024

A 35.0mm  B 14.3mm Radius 5.5mm Surface groove can be widened to give better proportional groove to the face of the job. Revised 6/05/2024

A 22.0mm  B 9.9mm Radius 3.2mm Surface groove can be widened to give better proportional groove to the face of the job. Revised 6/05/2024

A 35.0mm  B 14.3mm Rad 1 6.4mm Rad 2 10.0mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cut...

A 22.0mm  B 12.7mm Rad 1 4.0mm Rad 2 5.5mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cutt...

A 12.7mm  B 12.7mm  Surface reeding and lettering using top template   Revised 6/05/2024

A 19.0mm  B 38.1mm 1/2" Shank Specifically designed for heavy duty, fast, clean cutting which gives a superior finish with  minimal chipping to to...

A 19.0mm  B 50.0mm   Revised 6/05/2024

A 28.6mm  B 38.0mm   Revised 6/05/2024

A 16.0mm  B 25.4mm   Revised 6/05/2024

A 12.7mm  B 9.5mm   Revised 6/05/2024

A 12.7mm  B 25.4mm   Revised 6/05/2024

Radius - 5.5mm A - 25.4mm B - 16.0mm Revised 5/05/2024

Radius - 4.0mm A - 19.0mm B - 12.7mm Revised 5/05/2024

Radius - 2.4mm A - 12.7mm B - 9.5mm Revised 5/05/2024

Point 12.7mm Radius 6.4mm  A 25.4mm  B 19.0mm  Broad/Wide point beading  Can plunge and cut into the surface Revised 6/05/2024

Point 12.7mm Radius 3.2mm  A 19.0mm  B 11.1mm - Flat Bottom Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

Point 3.2mm Radius 3.2mm  A 9.5mm  B 9.5mm Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

60o V Grooving Bits   1/2" Shank Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and general ...

26.2mm Bull Nose Radius Bit   A 26.2mm  B 34.0mm Radius 12.7mm Used to round over top and bottom of a board in one pass.  Also will produce a half...

19.8mm Bull Nose Radius Bit   A 19.8mm  B 28.0mm Radius 9.5mm Used to round over top and bottom of a board in one pass.  Also will produce a half ...

16.7mm Bull Nose Radius Bit   A 16.7mm  B 25.4mm Radius 8.0mm Used to round over top and bottom of a board in one pass.  Also will produce a half ...

13.5mm Bull Nose Radius Bit   A 13.5mm  B 25.0mm Radius 6.5mm Used to round over top and bottom of a board in one pass.  Also will produce a half ...

                                        Radius 3.2mm  A 25.4mm  B 12.7mm  Fitted with B106 3/8" bearing creating a step These Classical bits produc...

                                        Radius 4.8mm  A 31.8mm  B 16.0mm 1/2" Shank Fitted with B106 3/8" bearing creating a step These Classical ...