Skip to content

Drill Bits and Drilling

  • Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 110mm Long M22 Thread
    $27.95

    Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 110mm Long M22 Thread

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

    View full details
    $27.95
  • Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Max 220mm Long M22 Thread
    $41.50

    Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Max 220mm Long M22 Thread

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods s...

    View full details
    $41.50
  • Replacement Pilot Bit for HMACT Core Drills - Brick and Masonry Hole Saws
    $3.95

    Replacement Pilot Bit for HMACT Core Drills - Brick and Masonry Hole Saws

    ConFit Australia

    NOTE : REPLACEMENT PILOT BIT ONLY TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal...

    View full details
    $3.95
  • 90mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $87.50

    90mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods ...

    View full details
    $87.50
  • 70mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $59.50

    70mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

    View full details
    $59.50
  • 65mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $54.50

    65mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

    View full details
    $54.50
  • Jointing Bits - 9-20mm Mitre Lock Bit - 1/2" Shank - TruaCuT
    $119.50

    Jointing Bits - 9-20mm Mitre Lock Bit - 1/2" Shank - TruaCuT

    ConFit Australia

    A 50.0mm  Capacity 9-20 Thick 1/2" Shank This Mitre Lock bit will make a locking joint at 90º or in a straight line.  It is recommended that a jig ...

    View full details
    $119.50
  • Router Bits - Edge Forming Bits - 19mm Beading Bit - 1/2" Shank - TruaCuT
    $65.95

    Router Bits - Edge Forming Bits - 19mm Beading Bit - 1/2" Shank - TruaCuT

    ConFit Australia

     The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they can be either a Beading or a Ro...

    View full details
    $65.95
  • TruaCut Router Bit - 19.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $54.95

    TruaCut Router Bit - 19.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. The bottom of the bit is ground for general plunging then normal side cutting.  Re...

    View full details
    $54.95
  • Router Bit - 16.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $54.95

    Router Bit - 16.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $54.95
  • TruaCut Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE
    $49.95

    TruaCut Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE

    ConFit Australia

    A 12.0mm  B 30.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $49.95
  • Flush Trim Bits - Router Bit - 12.7mm Straight Flush Trim Bit
    $33.95

    Flush Trim Bits - Router Bit - 12.7mm Straight Flush Trim Bit

    ConFit Australia

    A 12.7mm  B 25.4mm  These precision flush trim bits are specifically designed for heavy duty trimming.  The smaller diameter bits are used for trim...

    View full details
    $33.95
  • Slotting Cutters - Router Bits 2.5 General Slotting Cutter 12.7 x 38mm Shank
    $61.50

    Slotting Cutters - Router Bits 2.5 General Slotting Cutter 12.7 x 38mm Shank

    ConFit Australia

    2.5mm Slotting Cutter  General Slotting Cutter A 47.4mm  B 2.5mm  Shank 12.7 x 38mm 22mm Diameter Bearing 8mm ID   Revised 27/03/2026  

    $61.50
  • Groove Forming Bit - 14.9mm Ball Bearing Dovetail Bit with Top Bearing Guide
    $47.50

    Groove Forming Bit - 14.9mm Ball Bearing Dovetail Bit with Top Bearing Guide

    ConFit Australia

    A 14.0mm  B 13.0mm  E 15o  This 12.7mm ball  bearing guided Tungsten Carbide dovetail bit is used in conjunction with a (1/2") comb dovetail kit  a...

    View full details
    $47.50
  • Groove Forming Bit - 15mm Dovetail Bit (Hitachi, Makita Ryobi Etc)) 1/4" 6.35 x 30mm Shank
    $31.50

    Groove Forming Bit - 15mm Dovetail Bit (Hitachi, Makita Ryobi Etc)) 1/4" 6.35 x 30mm Shank

    ConFit Australia

    A 15.0mm  B 12.7mm  E 15o  For use on 7/8" (25mm) pitch comb dovetail kit with template ring guide Dovetail drawer jointing is the most popular use...

    View full details
    $31.50
  • TruaCuT Edge and Face Forming Bits -4.8mm Ogee Bits Fine Point for Router Lathe Work
    $70.50

    TruaCuT Edge and Face Forming Bits -4.8mm Ogee Bits Fine Point for Router Lathe Work

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Fine Point Used in Router Lathe Work A 21.0mm  B 15.0mm  Radius 4.8mm  E 1.0mm   Revised 23/12/2025

    $70.50
  • TruaCuT Edge Forming Bits - 9.5mm Roman Ogee Router Bit 1/2" Shank
    $71.50

    TruaCuT Edge Forming Bits - 9.5mm Roman Ogee Router Bit 1/2" Shank

    ConFit Australia

    The Roman Ogee bit is widely used on production of fine furniture. This bit provides a convex concave shape either with or without a  step on the t...

    View full details
    $71.50
  • Router Bit Ball Bearings Outside Dia 9.5mm Inside Dia 4.8 - TruaCuT
    $9.50

    Router Bit Ball Bearings Outside Dia 9.5mm Inside Dia 4.8 - TruaCuT

    ConFit Australia

    TruaCut Router Bit Ball Bearing  A - 9.5mm B  4.8mm   Revised 27/08/2026    

    $9.50
  • Router Bit Ball Bearings Outside Dia 16mm Inside Dia 4.8 -TruaCuT
    $9.50

    Router Bit Ball Bearings Outside Dia 16mm Inside Dia 4.8 -TruaCuT

    ConFit Australia

    TruaCut Router Bit Ball Bearing  A - 16mm B  4.8mm   Revised 17/04/2026    

    $9.50
  • Router Bit Ball Bearings Outside Dia 19mm Inside Dia 12.7 - TruaCuT
    $9.50

    Router Bit Ball Bearings Outside Dia 19mm Inside Dia 12.7 - TruaCuT

    ConFit Australia

    TruaCut Router Bit Ball Bearing  A - 19mm B  12.7mm   Revised 4/05/2026    

    $9.50
  • Router Bits - Edge Forming Bits - 32mm Rounding Over Bit 1/2" Shank TruaCuT
    $171.95

    Router Bits - Edge Forming Bits - 32mm Rounding Over Bit 1/2" Shank TruaCuT

    ConFit Australia

    Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

    View full details
    $171.95
  • Router Bits - Edge Forming Bits - 19mm Rounding Over Bit 1/2" Shank TruaCuT
    $65.50

    Router Bits - Edge Forming Bits - 19mm Rounding Over Bit 1/2" Shank TruaCuT

    ConFit Australia

    Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

    View full details
    $65.50
  • Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT
    $53.50

    Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT

    ConFit Australia

    Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits.  These are used for...

    View full details
    $53.50
  • Edge & Face Forming Bit - Router Bits - 4.8mm Veining Bit - TruaCuT
    $40.95

    Edge & Face Forming Bit - Router Bits - 4.8mm Veining Bit - TruaCuT

    ConFit Australia

    Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits.  These are used f...

    View full details
    $40.95