Skip to content

Drill Bits and Drilling

  • Router Bits - Edge Forming Bits - 13.0mm Chamfering Bit - TruaCuT
    $53.95

    Router Bits - Edge Forming Bits - 13.0mm Chamfering Bit - TruaCuT

    ConFit Australia

    B 15.8mm A 35.4mm  E 11.4mm   45o Chamfering bits are can be used just to break the edge or produce a full decorative cut. By fitting a smaller bea...

    View full details
    $53.95
  • Router Bits - Edge Forming Bits - 6.4mm Ogee Bit with Top Fillet - 1/2" Shank - Step- TruaCuT
    $60.50

    Router Bits - Edge Forming Bits - 6.4mm Ogee Bit with Top Fillet - 1/2" Shank - Step- TruaCuT

    ConFit Australia

    Radius 6.4mm A 41.4mm  B 18.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

    View full details
    $60.50
  • Router Bits - Edge Forming Bits - 4.8mm Ogee Bit with Top Fillet - 1/2" Shank - Step- TruaCuT
    $55.95

    Router Bits - Edge Forming Bits - 4.8mm Ogee Bit with Top Fillet - 1/2" Shank - Step- TruaCuT

    ConFit Australia

    Radius 4.8mm A 35.0mm  B 15.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

    View full details
    $55.95
  • Router Bits - Edge Forming Bits - 9.5mm Ogee Bit with Top Fillet - 1/2" Shank - TruaCuT
    $72.95

    Router Bits - Edge Forming Bits - 9.5mm Ogee Bit with Top Fillet - 1/2" Shank - TruaCuT

    ConFit Australia

    Radius 9.5mm A 54.0mm  B 25.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

    View full details
    $72.95
  • Router Bits - Edge Forming Bits - 6.4mm Ogee Bit with Top Fillet - 1/2" Shank - TruaCuT
    $60.50

    Router Bits - Edge Forming Bits - 6.4mm Ogee Bit with Top Fillet - 1/2" Shank - TruaCuT

    ConFit Australia

    Radius 6.4mm A 41.4mm  B 18.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

    View full details
    $60.50
  • Router Bits - Edge Forming Bits - 4.8mm Ogee Bit with Top Fillet - 1/2" Shank - TruaCuT
    $55.95

    Router Bits - Edge Forming Bits - 4.8mm Ogee Bit with Top Fillet - 1/2" Shank - TruaCuT

    ConFit Australia

    Radius 4.8mm A 35.0mm  B 15.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

    View full details
    $55.95
  • Router Bits - Edge Forming Bits - 16.0mm Cove Bit - TruaCuT
    $60.50

    Router Bits - Edge Forming Bits - 16.0mm Cove Bit - TruaCuT

    ConFit Australia

    Radius 16.0mm A 44.5mm  B 19.0mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024     

    $60.50
  • Router Bits - Edge Forming Bits - 12.7mm Cove Bit - TruaCuT
    $55.50

    Router Bits - Edge Forming Bits - 12.7mm Cove Bit - TruaCuT

    ConFit Australia

    Radius 12.7mm A 35.0mm  B 15.9mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024

    $55.50
  • Router Bits - Edge Forming Bits - 9.5mm Cove Bit - TruaCuT
    $53.95

    Router Bits - Edge Forming Bits - 9.5mm Cove Bit - TruaCuT

    ConFit Australia

    Radius 9.5mm A 28.6mm  B 12.7mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024     

    $53.95
  • Router Bits - Edge Forming Bits - 6.4mm Cove Bit - TruaCuT
    $50.50

    Router Bits - Edge Forming Bits - 6.4mm Cove Bit - TruaCuT

    ConFit Australia

    Radius 6.4mm A 22.0mm  B 12.7mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024     

    $50.50
  • Router Bit Straight Bit 4.8mm Spoon Flute Single for Cutting Aluminium & Soft Plastic
    $99.50

    Router Bit Straight Bit 4.8mm Spoon Flute Single for Cutting Aluminium & Soft Plastic

    ConFit Australia

    A 4.8mm  B 216 (1/2") 12.7 X 38mm Shank Solid tungsten carbide for cutting aluminium and some soft plastic. WHEN CUTTING ALUMINIUM USE A WAXSTICK ...

    View full details
    $99.50
  • Router Bit - 6.35mm x 25.4mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank RH Spiral Upcut for Aluminium
    $105.95

    Router Bit - 6.35mm x 25.4mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank RH Spiral Upcut for Aluminium

    ConFit Australia

    A 6.35mm  B 25.4mm  C 64.00   (1/2") 12.7 X 38mm Shank For NON Ferrous Metals Aluminium cutting solid tungsten carbide right hand up cut spiral - ...

    View full details
    $105.95
  • Straight Bit 4.8mm Spoon Flute for Aluminium
    $98.95

    Straight Bit 4.8mm Spoon Flute for Aluminium

    ConFit Australia

    Straight Bits - Single -SpoonFlute A 4.8mm  B 216 (1/2") 12.7 X 38mm Shank Solid tungsten carbide for cutting aluminium and some soft plastic. WHEN...

    View full details
    $98.95
  • Router Bit - 19.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $41.50

    Router Bit - 19.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $41.50
  • Router Bit - 18.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $41.50

    Router Bit - 18.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $41.50
  • Router Bit - 13.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $39.95

    Router Bit - 13.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $39.95
  • Router Bit - 12.7mm x 76.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $85.50

    Router Bit - 12.7mm x 76.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $85.50
  • Router Bit - 12.7mm x 63.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $62.95

    Router Bit - 12.7mm x 63.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $62.95
  • Router Bit - 12.7mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $39.95

    Router Bit - 12.7mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $39.95
  • Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE
    $37.50

    Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE

    ConFit Australia

    A 12.0mm  B 30.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $37.50
  • Router Bit - 10.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank High Performance
    $35.95

    Router Bit - 10.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank High Performance

    ConFit Australia

    A 10.0mm  B 30.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $35.95
  • Router Bit - 38.0mm x 38.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $56.95

    Router Bit - 38.0mm x 38.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 38.0mm  B 38.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $56.95
  • Router Bit - 28.5mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $43.50

    Router Bit - 28.5mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 28.5mm  B 32.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $43.50
  • Router Bit - 25.0mm x 38.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $37.50

    Router Bit - 25.0mm x 38.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 25.0mm  B 38.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $37.50