Drill Bits and Drilling

A 54.0mm  B 50.8 C 96.8110.0 Profile on top of rail can be varied using a half bull nose bit up or down. With ball Bearing Guide, 12.7mm (1/2') SHA...

A 58.7mm  B 38.7 C 96.8mm  Profile on top of rail can be varied using a half bull nose bit up or down.  With ball Bearing Guide, 12.7mm (1/2') SHAN...

A 50.8mm  B 57.1 C 116.0mm  This bit will produce an attractive and functional hand rail for balustrades.  It can be used in conjunction with the h...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 9.5mm  B 23.8mm C 12.7mm D 41.0mm The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the j...

A 41.0mm  B 13.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon th...

A 60.0mm  B 16.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon t...

A 72.0mm  B 16.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon t...

A 72.0mm  B 16.0mm  Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller depending upon th...

A 70.0mm  B 16.0mm Radius 16.0mm Selection of Raised Panel bits available in a variety of shapes.  Depth of cut can be made greater or smaller dep...

A 25.4mm  B 43.0mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 27.0mm  B 41.5mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 35.0mm  B 41.5mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 25.4mm  B 35.0mm  Radius 4.0mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

A 24.0mm  B 35.0mm  Radius 4.0mm All 1/2 x 38mm shk Face moulding bits are used extensively for the moulding of skirting boards,  picture frames, ...

A 35.0mm  B 38.0mm  Radius 4.8mm Flat edge mould for furniture or table edge    Revised 9/05/2024

A 50.8mm  B 29.2mm  C 89.0mm Radius 1 8.0mm Radius B 16.0mm This bit has a return to round over bottom of table for an attractive finish.  With ba...

A 51.0mm  B 25.4mm  Radius 6.4mm  Mainly table edge usage giving full beaded return with or with out a step on the bottom edge Revised 6/05/2024

A 50.8mm  B 18.3mm C 79.0mm Radius 1 8.0mm Radius 2 16.0mm A Popular bit for finishing table edges, With ball bearing guide, 12.7mm (1/2") SHANK. ...

A 40.0mm  B 30.0mm Radius 3.2mm Used for crowning furniture and table edging    Revised 6/05/2024

A 28.0mm  B 19.0mm 1/2" Shank This bit has a 10mm flat on the point for large top bearing guided signage Revised 6/05/2024