Skip to content

Filters

Drill Bits and Drilling

  • TruaCut Edge and Face Forming Bits -4.8mm Ogee Bits Fine Point For Router Lathe Work
    $84.50

    TruaCut Edge and Face Forming Bits -4.8mm Ogee Bits Fine Point For Router Lathe Work

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Fine Point Used in Router Lathe Work A 21.0mm  B 15.0mm  Radius 4.8mm  E 1.0mm   Revised 23/12/2025

    $84.50
  • Edge & Face Forming Bit - 22mm V Grooving Router Bit - 1/2" Shank - TruaCuT
    $48.50

    Edge & Face Forming Bit - 22mm V Grooving Router Bit - 1/2" Shank - TruaCuT

    ConFit Australia

    Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and general mitre joints. Revised 2/05/2026...

    View full details
    $48.50
  • Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT
    $48.50

    Edge & Face Forming Bit - Router Bits - 19mm Core Box Bit - TruaCuT

    ConFit Australia

    Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits.  These are used for...

    View full details
    $48.50
  • Edge & Face Forming Bit Top Bearing- V Lettering - 1/2" Shank - TruaCut
    $110.50

    Edge & Face Forming Bit Top Bearing- V Lettering - 1/2" Shank - TruaCut

    ConFit Australia

    A 28.0mm  B 19.0mm 1/2" Shank This bit has a 10mm flat on the point for large top bearing guided signage Revised 6/05/2024

    $110.50
  • Edge & Face Forming Bit Top Bearing- 5.5mm Provincial Plunge Top Guide - TruaCut
    $71.50

    Edge & Face Forming Bit Top Bearing- 5.5mm Provincial Plunge Top Guide - TruaCut

    ConFit Australia

    A 35.0mm  B 14.3mm Radius 5.5mm Surface groove can be widened to give better proportional groove to the face of the job. Revised 6/05/2024

    $71.50
  • Edge & Face Forming Bit Top Bearing- 3.2mm Provincial Plunge Top Guide - TruaCut
    $65.50

    Edge & Face Forming Bit Top Bearing- 3.2mm Provincial Plunge Top Guide - TruaCut

    ConFit Australia

    A 22.0mm  B 9.9mm Radius 3.2mm Surface groove can be widened to give better proportional groove to the face of the job. Revised 6/05/2024

    $65.50
  • Edge & Face Forming Bit Top Bearing- 6.4mm Classical Plunge Top Guide - TruaCut
    $71.50

    Edge & Face Forming Bit Top Bearing- 6.4mm Classical Plunge Top Guide - TruaCut

    ConFit Australia

    A 35.0mm  B 14.3mm Rad 1 6.4mm Rad 2 10.0mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cut...

    View full details
    $71.50
  • Edge & Face Forming Bit Top Bearing- 4mm Classical Plunge Top Guide - TruaCut
    $66.95

    Edge & Face Forming Bit Top Bearing- 4mm Classical Plunge Top Guide - TruaCut

    ConFit Australia

    A 22.0mm  B 12.7mm Rad 1 4.0mm Rad 2 5.5mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cutt...

    View full details
    $66.95
  • Edge & Face Forming Bit Top Bearing- 12mm Core Box - TruaCut
    $66.95

    Edge & Face Forming Bit Top Bearing- 12mm Core Box - TruaCut

    ConFit Australia

    A 12.7mm  B 12.7mm  Surface reeding and lettering using top template   Revised 6/05/2024

    $66.95
  • Edge & Face Forming Bit Top Bearing- Inverted Down Shear Flush Trim - 1/2" Shank - TruaCut
    $55.50

    Edge & Face Forming Bit Top Bearing- Inverted Down Shear Flush Trim - 1/2" Shank - TruaCut

    ConFit Australia

    A 19.0mm  B 38.1mm 1/2" Shank Specifically designed for heavy duty, fast, clean cutting which gives a superior finish with  minimal chipping to to...

    View full details
    $55.50
  • Edge & Face Forming Bit Top Bearing- 19mm Inverted Flush Trim - 1/2" Shank - Extra Long TruaCut
    $65.50

    Edge & Face Forming Bit Top Bearing- 19mm Inverted Flush Trim - 1/2" Shank - Extra Long TruaCut

    ConFit Australia

    A 19.0mm  B 50.0mm   Revised 6/05/2024

    $65.50
  • Edge & Face Forming Bit Top Bearing- 28.6mm Inverted Flush Trim - 1/2" Shank - TruaCut
    $94.50

    Edge & Face Forming Bit Top Bearing- 28.6mm Inverted Flush Trim - 1/2" Shank - TruaCut

    ConFit Australia

    A 28.6mm  B 38.0mm   Revised 6/05/2024

    $94.50
  • Edge & Face Forming Bit Top Bearing- 16mm Inverted Flush Trim - TruaCut
    $46.50

    Edge & Face Forming Bit Top Bearing- 16mm Inverted Flush Trim - TruaCut

    ConFit Australia

    A 16.0mm  B 25.4mm   Revised 6/05/2024

    $46.50
  • Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - Hinge Setting Bit - TruaCut
    $39.50

    Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - Hinge Setting Bit - TruaCut

    ConFit Australia

    A 12.7mm  B 9.5mm   Revised 6/05/2024

    $39.50
  • Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - TruaCut
    $42.50

    Edge & Face Forming Bit Top Bearing- 12.7mm Inverted Flush Trim - TruaCut

    ConFit Australia

    A 12.7mm  B 25.4mm   Revised 6/05/2024

    $42.50
  • Edge & Face Forming Bit - Router Bits - 11mm Surface Classical Round Nose - TruaCuT
    $87.50

    Edge & Face Forming Bit - Router Bits - 11mm Surface Classical Round Nose - TruaCuT

    ConFit Australia

    Radius - 5.5mm A - 25.4mm B - 16.0mm Revised 5/05/2024

    $87.50
  • Edge & Face Forming Bit - Router Bits - 8mm Surface Classical Round Nose - TruaCuT
    $84.50

    Edge & Face Forming Bit - Router Bits - 8mm Surface Classical Round Nose - TruaCuT

    ConFit Australia

    Radius - 4.0mm A - 19.0mm B - 12.7mm Revised 5/05/2024

    $84.50
  • Edge & Face Forming Bit - Router Bits - 4.8mm Surface Classical Round Nose - TruaCuT
    $79.95

    Edge & Face Forming Bit - Router Bits - 4.8mm Surface Classical Round Nose - TruaCuT

    ConFit Australia

    Radius - 2.4mm A - 12.7mm B - 9.5mm Revised 5/05/2024

    $79.95
  • Edge & Face Forming Bits - Router Bit - 6.4mm x 25mmBroad/Wide Point Beading Bit - TruaCuT
    $85.95

    Edge & Face Forming Bits - Router Bit - 6.4mm x 25mmBroad/Wide Point Beading Bit - TruaCuT

    ConFit Australia

    Point 12.7mm Radius 6.4mm  A 25.4mm  B 19.0mm  Broad/Wide point beading  Can plunge and cut into the surface Revised 6/05/2024

    $85.95
  • Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit Flat Bottom- TruaCuT
    $79.95

    Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit Flat Bottom- TruaCuT

    ConFit Australia

    Point 12.7mm Radius 3.2mm  A 19.0mm  B 11.1mm - Flat Bottom Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

    $79.95
  • Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit - TruaCuT
    $72.95

    Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit - TruaCuT

    ConFit Australia

    Point 3.2mm Radius 3.2mm  A 9.5mm  B 9.5mm Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

    $72.95
  • Edge & Face Forming Bit - 60o V Grooving Router Bit - 1/2" Shank - TruaCuT
    $55.50

    Edge & Face Forming Bit - 60o V Grooving Router Bit - 1/2" Shank - TruaCuT

    ConFit Australia

    60o V Grooving Bits   1/2" Shank Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and general ...

    View full details
    $55.50
  • TruaCut Edge and Face Forming Bits - 25.4mm Ball / Rope Track Bit
    $80.50

    TruaCut Edge and Face Forming Bits - 25.4mm Ball / Rope Track Bit

    ConFit Australia

     Designed to plunge and cut an open top ball track after using a straight cutter to relieve the centre just larger than the shank size of the track...

    View full details
    $80.50
  • TruaCut Edge and Face Forming Bits - 6.4mm Bead and Flute Bit - Used for Roll Top Desks
    $132.50

    TruaCut Edge and Face Forming Bits - 6.4mm Bead and Flute Bit - Used for Roll Top Desks

    ConFit Australia

    Sectional edge moulding and used extensively for male and female sections of Roll Top desks.   A 25.4mm  B 16.0mm  Radius 3.2mm   Revised 6/05/2...

    View full details
    $132.50