Drill Bits and Drilling

Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

A 35.0mm  B 38.0mm  Radius 4.8mm Flat edge mould for furniture or table edge    Revised 9/05/2024

A 50.8mm  B 29.2mm  C 89.0mm Radius 1 8.0mm Radius B 16.0mm This bit has a return to round over bottom of table for an attractive finish.  With ba...

A 51.0mm  B 25.4mm  Radius 6.4mm  Mainly table edge usage giving full beaded return with or with out a step on the bottom edge Revised 6/05/2024

A 50.8mm  B 18.3mm C 79.0mm Radius 1 8.0mm Radius 2 16.0mm A Popular bit for finishing table edges, With ball bearing guide, 12.7mm (1/2") SHANK. ...

A 40.0mm  B 30.0mm Radius 3.2mm Used for crowning furniture and table edging    Revised 6/05/2024

26.2mm Bull Nose Radius Bit   A 26.2mm  B 34.0mm Radius 12.7mm Used to round over top and bottom of a board in one pass.  Also will produce a half...

19.8mm Bull Nose Radius Bit   A 19.8mm  B 28.0mm Radius 9.5mm Used to round over top and bottom of a board in one pass.  Also will produce a half ...

16.7mm Bull Nose Radius Bit   A 16.7mm  B 25.4mm Radius 8.0mm Used to round over top and bottom of a board in one pass.  Also will produce a half ...

13.5mm Bull Nose Radius Bit   A 13.5mm  B 25.0mm Radius 6.5mm Used to round over top and bottom of a board in one pass.  Also will produce a half ...

                                        Radius 3.2mm  A 25.4mm  B 12.7mm  Fitted with B106 3/8" bearing creating a step These Classical bits produc...

                                        Radius 4.8mm  A 31.8mm  B 16.0mm 1/2" Shank Fitted with B106 3/8" bearing creating a step These Classical ...

                                         Radius 6.4mm  A 38.1mm  B 19.0mm 1/2" Shank   Fitted with B106 3/8" bearing creating a step These Classic...

Radius 3.2mm A 25.4mm  B 12.7mm   This bit produces a combination of convex step concave and step or part there of.  Small Bearing produces a step...

Radius 6.4mm A 38.0mm  B 17.5mm   This bit produces a combination of convex step concave and step or part there of.  Small Bearing produces a step...

Radius 4.8mm A 32.0mm  B 14.3mm   This bit produces a combination of convex step concave and step or part there of.  Small Bearing produces a step...

Radius 6.4mm A 38.0mm  B 17.5mm   This bit produces a combination of convex step concave and step or part there of.  No step. Revised 9/05/2024  

Radius 4.8mm A 32.0mm  B 14.3mm   This bit produces a combination of convex step concave and step or part there of.  No step.   Revised 9/05/2024

Radius 3.2mm A 25.4mm  B 12.7mm   This bit produces a combination of convex step concave and step or part there of.  No step.   Revised 9/05/2024

                                         Radius 6.4mm  A 38.1mm  B 19.0mm Fitted with B105 1/2" bearing  These Classical bits produce a convex and...

                                         Radius 4.8mm  A 31.8mm  B 16.0mm Fitted with B105 1/2" bearing giving a step  These Classical bits produce...

                                         Radius 3.2mm  A 25.4mm  B 12.7mm Fitted with B105 1/2"" bearing These Classical bits produce a convex and ...

 The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they can be either a Beading or a Ro...

Radius 16.0mm  A 44mm  B 22mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they ...

Radius 12.7mm  A 38mm  B 19mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they ...

Radius 12.7mm  A 38mm  B 19mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they ...

Radius 9.5mm  A 32mm  B 16mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they c...

Radius 9.5mm  A 32mm  B 16mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they c...

Radius 8mm  A 28mm  B 12.7mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they c...

Radius 8mm  A 28mm  B 12.7mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they c...

Radius 6.4mm  A 25mm  B 12.7mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they...

Radius 4.8mm  A 22mm  B 12.7mm The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they c...

Radius 3.2mm  A 19mm  B 9.5mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they ...

B 32.0mm A 57.2mm  E 22.5mm   45o Chamfering bits are can be used just to break the edge or produce a full decorative cut. By fitting a smaller bea...

B 25.4mm A 47.4mm  E 18.0mm   45o Chamfering bits are can be used just to break the edge or produce a full decorative cut. By fitting a smaller bea...

B 15.8mm A 35.4mm  E 11.4mm   45o Chamfering bits are can be used just to break the edge or produce a full decorative cut. By fitting a smaller bea...

Radius 6.4mm A 41.4mm  B 18.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Radius 4.8mm A 35.0mm  B 15.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Radius 9.5mm A 54.0mm  B 25.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Radius 9.5mm A 54.0mm  B 25.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Radius 6.4mm A 41.4mm  B 18.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Radius 4.8mm A 35.0mm  B 15.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Radius 16.0mm A 44.5mm  B 19.0mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024     

Radius 12.7mm A 35.0mm  B 15.9mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024

Radius 9.5mm A 28.6mm  B 12.7mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024     

Radius 6.4mm A 22.0mm  B 12.7mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024     

9.5mm Roman Ogee Router Bit Radius 9.5 A - 51mm B - 25mm The Roman Ogee bit is widely used on production of fine furniture. This bit provides a co...