Products

This black steel hex nipple is designed to connect two 2" BSP male fittings together.  With a 50mm diameter, it is a durable and reliable choice. T...

Black steel is made by adding carbon to iron during the smelting process. This creates iron-carbon alloys that are harder than pure iron but more ...

Brass ball valves are recommended for use in residential and light commercial applications and are suitable for hot or cold water, compressed air a...

Revised 19/08/2025

Revised 5/09/2022

AGA Approved Watermarked Certified DR Dezincification Resistant Green Handle Thread : AS1722.1 Max Working Temp: 150oC (Gas=60oC) Cold Working Pre...

 AGA Approved Watermarked Certified DR Dezincification Resistant T Handle Thread : AS1722.1 Max Working Temp: 150oC (Gas=60oC) Cold Working Pressu...

 AGA Approved Watermarked Certified DR Dezincification Resistant Lockable Green Handle Thread : AS1722.1 Max Working Temp: 150oC (Gas=60oC) Cold W...

Revised 18/05/2026

Watermark and AGA approved Tested and certified to SPEC012 and AS4617 Full boreBlow proof spindleWorking temperature -20°C to 120°CMaximum pressure...

Revised 14/12/2025

  Revised 5/11/2025

    Revised 1/01/2023

  Revised 1/01/2023

  Revised 8/05/2026

Revised 12/04/2026

Revised 13/04/2026

Flange Width - 152.0mm Thread Thickness - 25.4mm Flange Plate Thickness - 10.3mm   Revised 2/01/2023

  Revised 19/01/2026

  Revised 14/12/2025

Revised 29/09/2025

Revised 18/05/2026

Flange Width - 140.0mm Thread Thickness - 24.0mm Flange Plate Thickness - 110.0mm   Revised 2/01/2023

Flange Width - 139.7mm Thread Thickness - 25.4mm Flange Plate Thickness - 10.3mm   Revised 2/01/2023

  Revised 30/08/2025

  Revised 13/04/2026

Suitable for a wide range of chemical applications, including industrial and agricultural chemicals* and potable and non potable water FULL FLOW -...

The Guyco Ball Valve offers a smooth open and close action to allow or stop the flow of water. The “full flow” Australian design ensures there is m...

The Guyco Ball Valve offers a smooth open and close action to allow or stop the flow of water. The “full flow” Australian design ensures there is m...

The Anka plastic check valves minimise the development of reverse flow that may damage pumps. It restricts flow to only one direction (spring retur...

Type: Union Size Range: 20mm (3/4″) – 50mm (2″) Pipe Unions are designed for a number of pipe work installations around pumps, tanks, dairy sheds,...

DAMOS Rural Compression Fittings Rural Compression to Rural Compression Farming Irrigation Applications Rural Polyethylene Pipe Connector Revised ...

The Rural Compression Fittings range is NORMA Group Manufactured with a high level of quality for product peace of mind.  These fittings are UV st...

Revised 26/12/2022

Body - Nylon Mesh - 304 Stainless Steel Length - 77mm Mesh Size  1200um Revised 04/10/2025

2" BSP Stainless Steel Skin Fitting BSP Male Through Hull Fitting with Backnut 316 Stainless Steel Working Pressure 150 psi Revised 19/05/2025

Swing Check Valves are used where the flow moves through the valve in approximately a straight line, similar to that in a gate valve. They are comm...

  Revised 16/01/2023

Black steel is made by adding carbon to iron during the smelting process. This creates iron-carbon alloys that are harder than pure iron but more b...

Revised 26/12/2022

Revised 16/01/2023

  Revised 16/01/2023

Black steel is made by adding carbon to iron during the smelting process. This creates iron-carbon alloys that are harder than pure iron but more b...

  Revised 16/01/2023  

Revised 26/12/2022

  Revised 16/01/2023

Revised 26/12/2022