Skip to content

Products

  • TruaCuT PCF Fibre Cement Cutting Blade 235mm Dia x 25mm Bore x 5 Teeth
    $200.95

    TruaCuT PCF Fibre Cement Cutting Blade 235mm Dia x 25mm Bore x 5 Teeth

    ConFit Australia

    Polycrystalline Diamond Saw Blade   Revised 20/05/2024  

    $200.95
  • TruaCuT PCF Fibre Cement Cutting Blade 250mm Dia x 30mm Bore x 6 Teeth
    $247.50

    TruaCuT PCF Fibre Cement Cutting Blade 250mm Dia x 30mm Bore x 6 Teeth

    ConFit Australia

    Polycrystalline Diamond Saw Blade   Revised 20/05/2024  

    $247.50
  • TruaCuT PCF Fibre Cement Cutting Blade 305mm Dia x 30mm Bore x 8 Teeth
    $345.00

    TruaCuT PCF Fibre Cement Cutting Blade 305mm Dia x 30mm Bore x 8 Teeth

    ConFit Australia

    Polycrystalline Diamond Saw Blade   Revised 27/10/2026  

    $345.00
  • TruaCuT PCF Fibre Cement Cutting Blade 350mm Dia x 30mm Bore x 8 Teeth
    $336.95

    TruaCuT PCF Fibre Cement Cutting Blade 350mm Dia x 30mm Bore x 8 Teeth

    ConFit Australia

    Polycrystalline Diamond Saw Blade   Revised 20/05/2024  

    $336.95
  • TruaCut Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE
    $49.95

    TruaCut Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE

    ConFit Australia

    A 12.0mm  B 30.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $49.95
  • TruaCut Router Bit - 19.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $54.95

    TruaCut Router Bit - 19.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. The bottom of the bit is ground for general plunging then normal side cutting.  Re...

    View full details
    $54.95
  • TruaCuT Vacuum Brazed Diamond Router Bits - 3.2mm Rounding Over Bit
    $67.95

    TruaCuT Vacuum Brazed Diamond Router Bits - 3.2mm Rounding Over Bit

    ConFit Australia

    Rounding Over Bits 60/70 Diamond Grit   Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products...

    View full details
    $67.95
  • TruaCuT Vacuum Brazed Diamond Router Bits - 4.0mm Rounding Over Bit
    $52.50

    TruaCuT Vacuum Brazed Diamond Router Bits - 4.0mm Rounding Over Bit

    ConFit Australia

     Revised 19/09/2025

    $52.50
  • TruaCuT Vacuum Brazed Diamond Router Bits - 6.4mm Rounding Over Bit
    $76.95

    TruaCuT Vacuum Brazed Diamond Router Bits - 6.4mm Rounding Over Bit

    ConFit Australia

    Rounding Over Bits 60/70 Diamond Grit   Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products...

    View full details
    $76.95
  • TruaCuT Vacuum Brazed Diamond Router Bits -Chamfering Bit - 12mm Depth of Cut - 60/70 Grit
    $103.00

    TruaCuT Vacuum Brazed Diamond Router Bits -Chamfering Bit - 12mm Depth of Cut - 60/70 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $103.00
  • TruaCuT Vacuum Brazed Diamond Router Bits -Core Box Bit - 25.4mm Wide Cut - 40/50 Grit
    $66.95

    TruaCuT Vacuum Brazed Diamond Router Bits -Core Box Bit - 25.4mm Wide Cut - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...

    View full details
    $66.95
  • TruaCuT Vacuum Brazed Diamond Router Bits -Flush Trim Bit - 12.7mm Dia x 38mm - 60/70 Grit
    $72.50

    TruaCuT Vacuum Brazed Diamond Router Bits -Flush Trim Bit - 12.7mm Dia x 38mm - 60/70 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...

    View full details
    $72.50
  • TruaCuT Vacuum Brazed Diamond Router Bits -Inverted Trim Bit - 28 x 38mm - 60/70 Grit
    $110.50

    TruaCuT Vacuum Brazed Diamond Router Bits -Inverted Trim Bit - 28 x 38mm - 60/70 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...

    View full details
    $110.50
  • TruaCuT Vacuum Brazed Diamond Router Bits -Ogee Bit - 10mm Radius 20mm Depth - 60/70 Grit
    $166.95

    TruaCuT Vacuum Brazed Diamond Router Bits -Ogee Bit - 10mm Radius 20mm Depth - 60/70 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...

    View full details
    $166.95
  • TruaCuT Vacuum Brazed Diamond Router Bits -Straight Bit - 10 x 40mm - 40/50 Grit
    $53.50

    TruaCuT Vacuum Brazed Diamond Router Bits -Straight Bit - 10 x 40mm - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...

    View full details
    $53.50
  • TruaCuT Vacuum Brazed Diamond Router Bits -Straight Bit - 13 x 40mm - 40/50 Grit
    $72.50

    TruaCuT Vacuum Brazed Diamond Router Bits -Straight Bit - 13 x 40mm - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $72.50
  • TruaCuT Vacuum Brazed Diamond Router Bits -Straight Bit - 6.4 x 25mm - 40/50 Grit
    $58.95

    TruaCuT Vacuum Brazed Diamond Router Bits -Straight Bit - 6.4 x 25mm - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. 1/2" Shaft  Granite, marble, natural &...

    View full details
    $58.95
  • TruaCuT Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 11mm Depth of Cut - 40/50 Grit
    Sold out
    $55.95

    TruaCuT Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 11mm Depth of Cut - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $55.95
    Sold out
  • TruaCuT Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 17mm Depth of Cut - 40/50 Grit
    $88.50

    TruaCuT Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 17mm Depth of Cut - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $88.50
  • TruaCuT Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 17mm Depth of Cut - 60/70 Grit
    $88.50

    TruaCuT Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 17mm Depth of Cut - 60/70 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...

    View full details
    $88.50
  • TruaCuT Vacuum Brazed Diamond Router Head - 12.7mm Rounding Over 40/50 Grit
    $243.95

    TruaCuT Vacuum Brazed Diamond Router Head - 12.7mm Rounding Over 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $243.95
  • TruaCuT Vacuum Brazed Diamond Router Head - 15.8mm Rounding Over 40/50 Grit
    $264.95

    TruaCuT Vacuum Brazed Diamond Router Head - 15.8mm Rounding Over 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $264.95
  • TruaCuT Vacuum Brazed Diamond Router Head - 19mm Rounding Over 40/50 Grit
    $277.50

    TruaCuT Vacuum Brazed Diamond Router Head - 19mm Rounding Over 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $277.50
  • TruaCuT Vacuum Brazed Diamond Router Head - 25mm Rounding Over 40/50 Grit
    $296.50

    TruaCuT Vacuum Brazed Diamond Router Head - 25mm Rounding Over 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $296.50
  • TruaCuT Vacuum Brazed Diamond Router Head - 30mm Rounding Over 40/50 Grit
    $305.95

    TruaCuT Vacuum Brazed Diamond Router Head - 30mm Rounding Over 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $305.95
  • TruaCuT Vacuum Brazed Diamond Router Head - 6.4mm Rounding Over 40/50 Grit
    $229.95

    TruaCuT Vacuum Brazed Diamond Router Head - 6.4mm Rounding Over 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $229.95
  • TruaCuT Vacuum Brazed Diamond Router Head - 9.5mm Rounding Over 40/50 Grit
    $236.50

    TruaCuT Vacuum Brazed Diamond Router Head - 9.5mm Rounding Over 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $236.50
  • TruaCuT Vacuum Brazed Diamond Router Head - Bull Nose Head - 15mm Rad for 30mm Sheets 40/50 Grit
    $369.50

    TruaCuT Vacuum Brazed Diamond Router Head - Bull Nose Head - 15mm Rad for 30mm Sheets 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $369.50
  • TruaCuT Vacuum Brazed Diamond Router Head - Bull Nose Head - 9.5mm Rad for 20mm Sheets 40/50 Grit
    $475.00

    TruaCuT Vacuum Brazed Diamond Router Head - Bull Nose Head - 9.5mm Rad for 20mm Sheets 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Heads are used on Angle Grinders with (M14 thread as used in Australia) to grind flats or produce a perfect p...

    View full details
    $475.00
  • Truck Gauge Dual Head10-150psi
    $226.98

    Truck Tyre Pressure Gauge Dual Head 10-150psi

    ConFit Australia

    Truck Gauge Dual Head10-150psiSold per: EA

    $226.98
  • TRUE FIT MALE BARBED TANK FITTING 1" BSP
    $14.50

    TRUE FIT MALE BARBED TANK FITTING 1" BSP

    ConFit Australia

    Reviewed 13/10/2026

    $14.50
  • TRUE FIT MALE BARBED TANK FITTING 1-1/2" BSP (40mm)
    $25.50

    TRUE FIT MALE BARBED TANK FITTING 1-1/2" BSP (40mm)

    ConFit Australia

    Reviewed 12/06/2023

    $25.50
  • TRUE FIT MALE BARBED TANK FITTING 1-1/4" BSP (32mm)
    $22.50

    TRUE FIT MALE BARBED TANK FITTING 1-1/4" BSP (32mm)

    ConFit Australia

    Reviewed 9/03/2025

    $22.50
  • TRUE FIT MALE BARBED TANK FITTING 1/2" BSP
    $10.50

    TRUE FIT MALE BARBED TANK FITTING 1/2" BSP

    ConFit Australia

    Reviewed 7/01/2026

    $10.50
  • TRUE FIT MALE BARBED TANK FITTING 2" BSP (50mm)
    $30.95

    TRUE FIT MALE BARBED TANK FITTING 2" BSP (50mm)

    ConFit Australia

    Reviewed 12/06/2023

    $30.95
  • TRUE FIT MALE BARBED TANK FITTING 3/4" BSP (20mm)
    $12.50

    TRUE FIT MALE BARBED TANK FITTING 3/4" BSP (20mm)

    ConFit Australia

    Reviewed 12/06/2023

    $12.50
  • Sold out
    $44.50

    Tungsten Carbide Chip Motar Rake 8mm x 40mm for Angle Grinders

    ConFit Australia

    $44.50
    Sold out
  • Tungsten Carbide Knife & Scissor Sharpener Suction Hold Down Kitchen Cooking
    $20.50

    Tungsten Carbide Knife & Scissor Sharpener Suction Hold Down Kitchen Cooking

    ConFit Australia

    Revised 15/08/2025

    $20.50
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -16mm Diameter - Steel, Iron, Stainless Steel
    $21.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -16mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $21.95
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -18mm Diameter - Steel, Iron, Stainless Steel
    $24.50

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -18mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $24.50
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -20mm Diameter - Steel, Iron, Stainless Steel
    $27.50

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -20mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $27.50
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -22mm Diameter - Steel, Iron, Stainless Steel
    $29.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -22mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $29.95
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -26mm Diameter - Steel, Iron, Stainless Steel
    $35.50

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -26mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $35.50
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -32mm Diameter - Steel, Iron, Stainless Steel
    $43.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -32mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $43.95
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -35mm Diameter - Steel, Iron, Stainless Steel
    $47.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -35mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $47.95
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -38mm Diameter - Steel, Iron, Stainless Steel
    $51.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -38mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $51.95
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -40mm Diameter - Steel, Iron, Stainless Steel
    $54.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -40mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $54.95
  • Tungsten Carbide Tipped Hole Saw for Metal (Trade) -45mm Diameter - Steel, Iron, Stainless Steel
    $59.95

    Tungsten Carbide Tipped Hole Saw for Metal (Trade) -45mm Diameter - Steel, Iron, Stainless Steel

    ConFit Australia

    Suitable for steel, iron and stainless steel.  Suit 3mm to 10mm depth of cut.  HSS pilot drill with spring ejector.  Max drill depth 13mm with no s...

    View full details
    $59.95