Skip to content

Filters

Products

  • Electrofusion Equal Tee 63mm Water Mark Approved
    $53.50

    Electrofusion Equal Tee 63mm Water Mark Approved

    ConFit Australia

    Revised 19/05/2024

    $53.50
  • Electrofusion Equal Tee 75mm Water Mark Approved
    $83.95

    Electrofusion Equal Tee 75mm Water Mark Approved

    ConFit Australia

    Revised 19/05/2024

    $83.95
  • Electrofusion Equal Tee 90mm Water Mark Approved
    $117.95

    Electrofusion Equal Tee 90mm Water Mark Approved

    ConFit Australia

    Revised 19/05/2024

    $117.95
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $350.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $350.00
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -15mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $70.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -15mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $70.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -15mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $70.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -15mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $70.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -17mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $73.95

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -17mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $73.95
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -18mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $77.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -18mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $77.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -19mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $81.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -19mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $81.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -20mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $80.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -20mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $80.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -22mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $80.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -22mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $80.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -25mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $84.95

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -25mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $84.95
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -26mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $89.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -26mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $89.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -32mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $100.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -32mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $100.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -38mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $121.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -38mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $121.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -40mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $121.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -40mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $121.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -43mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $140.95

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -43mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $140.95
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -48mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $164.50

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -48mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $164.50
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -50mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $177.95

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -50mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $177.95
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -54mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $200.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -54mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $200.00
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -60mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $210.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -60mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $210.00
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -64mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $225.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -64mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $225.00
  • Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -86mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals
    $335.00

    Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -86mm Diameter - Steel, Iron, Stainless Steel & Non-Ferrous Metals

    ConFit Australia

    Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill bit with spring ej...

    View full details
    $335.00
  • EPDM Washer to Suit Brass BSP Female Flanged Wide Backnut 1-1/4" (32mm)
    $5.50

    EPDM Washer to Suit Brass BSP Female Flanged Wide Backnut 1-1/4" (32mm)

    ConFit Australia

    Revised 8/04/2023

    $5.50
  • EPDM Washer to Suit Brass BSP Female Flanged Wide Backnut 2"
    $5.50

    EPDM Washer to Suit Brass BSP Female Flanged Wide Backnut 2"

    ConFit Australia

    Revised 13/07/2025

    $5.50
  • Face Moulding Bits - Bead / Low S / Plinth Face Mould - TruaCuT
    $142.50

    Face Moulding Bits - Bead / Low S / Plinth Face Mould - TruaCuT

    ConFit Australia

    A 27.0mm  B 41.5mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

    View full details
    $142.50
  • Face Moulding Bits - Bead Shallow Surface Concave - TruaCuT
    $142.50

    Face Moulding Bits - Bead Shallow Surface Concave - TruaCuT

    ConFit Australia

    A 25.4mm  B 35.0mm  Radius 4.0mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

    View full details
    $142.50
  • Face Moulding Bits - Deep Federation Face Mould - TruaCuT
    $142.50

    Face Moulding Bits - Deep Federation Face Mould - TruaCuT

    ConFit Australia

    A 35.0mm  B 41.5mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

    View full details
    $142.50
  • Face Moulding Bits - Flat Classical Face Mould - TruaCuT
    $142.50

    Face Moulding Bits - Flat Classical Face Mould - TruaCuT

    ConFit Australia

    A 25.4mm  B 43.0mm  Radius 3.2mm All 1/2 x 38mm shank Face moulding bits are used extensively for the moulding of skirting boards,  picture frames...

    View full details
    $142.50
  • Face Moulding Bits - Short Classical Face Mould - TruaCuT
    $142.50

    Face Moulding Bits - Short Classical Face Mould - TruaCuT

    ConFit Australia

    A 24.0mm  B 35.0mm  Radius 4.0mm All 1/2 x 38mm shk Face moulding bits are used extensively for the moulding of skirting boards,  picture frames, ...

    View full details
    $142.50
  • Sold out
    $4.00

    Fast Clean Cut for Wood

    ConFit Australia

    $4.00
    Sold out
  • Sold out
    $8.00

    Fast Clean Cut for Wood

    ConFit Australia

    $8.00
    Sold out
  • Sold out
    $4.00

    Fast Clean Cut for Wood

    ConFit Australia

    $4.00
    Sold out
  • Sold out
    $8.00

    Fast Clean Cut for Wood

    ConFit Australia

    $8.00
    Sold out
  • Sold out
    $4.00

    Fast Clean Cut for Wood

    ConFit Australia

    $4.00
    Sold out
  • Sold out
    $8.00

    Fast Clean Cut for Wood

    ConFit Australia

    $8.00
    Sold out