Skip to content

Filters

Products

  • Recycled Water Products Elbow for Washing Machine Kit 5/8" Male x 20 Female 90mm Long
    $11.34

    Recycled Water Products Elbow for Washing Machine Kit 5/8" Male x 20 Female 90mm Long

    ConFit Australia

    $11.34
  • Recycled Water Products Hose Tap 5/8" BSP Female Lilac
    $28.50

    Recycled Water Products Hose Tap 5/8" BSP Female Lilac

    ConFit Australia

    Length 79mm Height 58mm Width 26mm H1 G 5/8"   Working temperature 1°C to 60°C Maximum pressure rating 1000kPa Watermark approved Tested and certif...

    View full details
    $28.50
  • Recycled Water Products Key for Hose Tap Lilac
    $5.50

    Recycled Water Products Key for Hose Tap Lilac

    ConFit Australia

    Length 76mm Height 30mm   Revised 18/05/026

    $5.50
  • Recycled Water Products Nut and Tail (To Suit Kit RWKN20) for Hose Tap Kit Lilac
    $9.50

    Recycled Water Products Nut and Tail (To Suit Kit RWKN20) for Hose Tap Kit Lilac

    ConFit Australia

    Revised 12/08/2024

    $9.50
  • Recycled Water Products Washing Machine Kit 120mm 5/8" Female Inlet x 3/4 Male Outlet
    $69.00

    Recycled Water Products Washing Machine Kit 120mm 5/8" Female Inlet x 3/4 Male Outlet

    ConFit Australia

    All Items Can Be Purchased Separately

    $69.00
  • Recycled Water Products Washing Machine Kit 75mm 5/8" Male Inlet x 3/4 Male Outlet
    $45.68

    Recycled Water Products Washing Machine Kit 75mm 5/8" Male Inlet x 3/4 Male Outlet

    ConFit Australia

    All Items Can Be Purchased Separately

    $45.68
  • Recycled Water Products Washing Machine Kit 90mm 5/8" Female Inlet x 3/4 Male Outlet
    $47.56

    Recycled Water Products Washing Machine Kit 90mm 5/8" Female Inlet x 3/4 Male Outlet

    ConFit Australia

    All Items Can Be Purchased Separately

    $47.56
  • Recycled Water Products Washing Machine Stop 1/2" Female Inlet x 3/4" Male Outlet
    $31.30

    Recycled Water Products Washing Machine Stop 1/2" Female Inlet x 3/4" Male Outlet

    ConFit Australia

    $31.30
  • Recycled Water Products Washing Machine Stop 5/8"
    $29.38

    Recycled Water Products Washing Machine Stop 5/8"

    ConFit Australia

    TH3 - G 5/8"                                                               TH4 - G 3/4"

    $29.38
  • Replacement Carbon Steel Cutters (2Per Pack) for Adjustable Hole Saw Kit
    $7.50

    Replacement Carbon Steel Cutters (2Per Pack) for Adjustable Hole Saw Kit

    ConFit Australia

    Replacement Carbon Steel Cutters  (2 per pack) for  Hole Saw Kits AHS220K & AHS300K   Replacement high carbon steel blade set. Suitable for cu...

    View full details
    $7.50
  • Replacement Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals
    $2.50

    Replacement Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals

    ConFit Australia

    SPARE PARTS ONLY Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill b...

    View full details
    $2.50
  • Replacement Float and Valve for Stockbrands 2.5 Litre Animal Pet Drinking Bowl with Plastic Cover Trough
    $41.50

    Replacement Float and Valve for Stockbrands 2.5 Litre Animal Pet Drinking Bowl with Plastic Cover Trough

    ConFit Australia

    The Stockbrands Pet Drinking Bowl is the ideal solution for the constant supply of fresh drinking water to large or smaller animals, aviaries and p...

    View full details
    $41.50
  • Sold out
    $34.00

    Replacement Neoprene Vacuum Seal

    ConFit Australia

    $34.00
    Sold out
  • Replacement Pilot Bit for HMACT Core Drills - Brick and Masonry Hole Saws
    $4.95

    Replacement Pilot Bit for HMACT Core Drills - Brick and Masonry Hole Saws

    ConFit Australia

    NOTE : REPLACEMENT PILOT BIT ONLY TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor.  Internal...

    View full details
    $4.95
  • Replacement Pilot Drill & Ejector Spring for TCT Hole Saw for Metal (Trade)
    $7.50

    Replacement Pilot Drill & Ejector Spring for TCT Hole Saw for Metal (Trade)

    ConFit Australia

    SPARE PARTS ONLY Replacement Pilot Drill & Ejector Spring for TUNGSTEN CARBIDE TIPPED HOLE SAWS FOR METAL  Suitable for steel, iron and stainle...

    View full details
    $7.50
  • Replacement Pilot Drill with Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals
    $9.95

    Replacement Pilot Drill with Ejector Spring for Engineering Grade Tungsten Carbide Tipped Hole Saw for Metal -102mm Diameter - Steel, Iron, Stainless Steel & Non-ferrous metals

    ConFit Australia

    SPARE PARTS ONLY Fine micron grade of tungsten carbide.  Precision engineering grade.  Teeth are triple tip pattern.  Split point HSS pilot drill b...

    View full details
    $9.95
  • Replacement Tungsten Carbide Cutters (2 per Pack) for Adjustable Hole Saw Kit
    $11.95

    Replacement Tungsten Carbide Cutters (2 per Pack) for Adjustable Hole Saw Kit

    ConFit Australia

    Replacement tungsten carbide cutters (2 cutters per pack) for Hole Saw Kits AHS220K & AHS300K Note this if for the Cutters Only Replacement tu...

    View full details
    $11.95
  • Replacement Tungsten Carbide Pilot Drill (1 per Pack) for Adjustable Hole Saw Kit
    $4.95

    Replacement Tungsten Carbide Pilot Drill (1 per Pack) for Adjustable Hole Saw Kit

    ConFit Australia

    Replacement tungsten carbide pilot drill  (1 per pack) for  Hole Saw Kits AHS220K & AHS300K Note this if for the Pilot Drill Only   Revised 19/...

    View full details
    $4.95
  • Replacement Washer for Poly Threaded Nut and Tail 15mm x 1/2" BSP Guyco - Pack of 10
    $10.95

    Replacement Washer for Poly Threaded Nut and Tail 15mm x 1/2" BSP Guyco - Pack of 10

    ConFit Australia

    Guyco Nut and Tails are used with flexible hose to provide a FI BSPT threaded fitting so that the hose can be connected to a valve, another fitting...

    View full details
    $10.95
  • Replacement Washer for Poly Threaded Nut and Tail 20mm x 3/4" BSP Guyco - Pack of 10
    $10.95

    Replacement Washer for Poly Threaded Nut and Tail 20mm x 3/4" BSP Guyco - Pack of 10

    ConFit Australia

    Guyco Nut and Tails are used with flexible hose to provide a FI BSPT threaded fitting so that the hose can be connected to a valve, another fitting...

    View full details
    $10.95
  • Replacement Washer for Poly Threaded Nut and Tail 25mm x 1" BSP Guyco - Pack of 10
    $12.00

    Replacement Washer for Poly Threaded Nut and Tail 25mm x 1" BSP Guyco - Pack of 10

    ConFit Australia

    Guyco Nut and Tails are used with flexible hose to provide a FI BSPT threaded fitting so that the hose can be connected to a valve, another fitting...

    View full details
    $12.00
  • Replacement Washer for Poly Threaded Nut and Tail 32mm x 1-1/4" BSP Guyco
    $1.50

    Replacement Washer for Poly Threaded Nut and Tail 32mm x 1-1/4" BSP Guyco

    ConFit Australia

    Guyco Nut and Tails are used with flexible hose to provide a FI BSPT threaded fitting so that the hose can be connected to a valve, another fitting...

    View full details
    $1.50
  • Replacement Washer for Poly Threaded Nut and Tail 40mm x 1-1/2" BSP Guyco - Pack of 10
    $20.00

    Replacement Washer for Poly Threaded Nut and Tail 40mm x 1-1/2" BSP Guyco - Pack of 10

    ConFit Australia

    Guyco Nut and Tails are used with flexible hose to provide a FI BSPT threaded fitting so that the hose can be connected to a valve, another fitting...

    View full details
    $20.00
  • Replacement Washer for Poly Threaded Nut and Tail 50mm x 2" BSP Guyco - Pack of 10
    $20.95

    Replacement Washer for Poly Threaded Nut and Tail 50mm x 2" BSP Guyco - Pack of 10

    ConFit Australia

    Guyco Nut and Tails are used with flexible hose to provide a FI BSPT threaded fitting so that the hose can be connected to a valve, another fitting...

    View full details
    $20.95
  • Replacement Washer for Poly Threaded Nut and Tail 75mm x 3" BSP Guyco - Pack of 10
    $45.00

    Replacement Washer for Poly Threaded Nut and Tail 75mm x 3" BSP Guyco - Pack of 10

    ConFit Australia

    Guyco Nut and Tails are used with flexible hose to provide a FI BSPT threaded fitting so that the hose can be connected to a valve, another fitting...

    View full details
    $45.00
  • Rocket Wire Wheel Crimped 50mm x 6mm Hex Shaft
    $8.50

    Rocket Wire Wheel Crimped 50mm x 6mm Hex Shaft

    ConFit Australia

    Wire Wheel Crimped 50mm x 6mm shaft. 7mm Wire Brush Thickness CRIMPED WIRE WHEELS Crimped wire wheels are less aggressive than twist knot brushes. ...

    View full details
    $8.50
  • Sold out
    $0.00

    Roll for Spanners (No Spanners Included)

    ConFit Australia

    $0.00
    Sold out
  • Router Bit - 10.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank
    $32.00

    Router Bit - 10.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank

    ConFit Australia

    A - 10.0mm B - 19.0mm Double flute bits are recommended for general routing, grooving and rebating etc. Bottom of the bit is ground for general plu...

    View full details
    $32.00
  • Router Bit - 10.0mm x 25.4mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank
    $40.95

    Router Bit - 10.0mm x 25.4mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank

    ConFit Australia

    A - 10.0mm B - 25.4mm Double flute bits are recommended for general routing, grooving and rebating etc. Bottom of the bit is ground for general plu...

    View full details
    $40.95
  • Router Bit - 10.0mm x 25.4mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $36.50

    Router Bit - 10.0mm x 25.4mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 10.0mm  B 25.4mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $36.50
  • Router Bit - 10.0mm x 30.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank High Performance
    $48.95

    Router Bit - 10.0mm x 30.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank High Performance

    ConFit Australia

    A - 10.0mm B - 30.0mm High Performance Double flute bits are recommended for general routing, grooving and rebating etc. Bottom of the bit is groun...

    View full details
    $48.95
  • Router Bit - 10.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank High Performance
    $41.95

    Router Bit - 10.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank High Performance

    ConFit Australia

    A 10.0mm  B 30.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $41.95
  • Router Bit - 11.0mm x 25.4mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $37.95

    Router Bit - 11.0mm x 25.4mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 11.0mm  B 25.4mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $37.95
  • Router Bit - 12.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank
    $32.00

    Router Bit - 12.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank

    ConFit Australia

    A - 12.0mm B - 19.0mm Double flute bits are recommended for general routing, grooving and rebating etc. Bottom of the bit is ground for general plu...

    View full details
    $32.00
  • Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE
    $43.50

    Router Bit - 12.0mm x 30.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank HIGH PERFORMANCE

    ConFit Australia

    A 12.0mm  B 30.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $43.50
  • Router Bit - 12.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $37.95

    Router Bit - 12.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 12.0mm  B 32.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $37.95
  • Router Bit - 12.7mm x 25.4mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank
    $40.95

    Router Bit - 12.7mm x 25.4mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank

    ConFit Australia

    A - 12.7mm B - 25.4mm Double flute bits are recommended for general routing, grooving and rebating etc. Bottom of the bit is ground for general plu...

    View full details
    $40.95
  • Router Bit - 12.7mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $37.95

    Router Bit - 12.7mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 12.7mm  B 32.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $37.95
  • Router Bit - 12.7mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $48.50

    Router Bit - 12.7mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $48.50
  • Router Bit - 12.7mm x 63.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $75.50

    Router Bit - 12.7mm x 63.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $75.50
  • Router Bit - 12.7mm x 76.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $102.95

    Router Bit - 12.7mm x 76.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $102.95
  • Router Bit - 13.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank
    $32.00

    Router Bit - 13.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank

    ConFit Australia

    A - 13.0mm B - 19.0mm Double flute bits are recommended for general routing, grooving and rebating etc. Bottom of the bit is ground for general plu...

    View full details
    $32.00
  • Router Bit - 13.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $37.95

    Router Bit - 13.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 13.0mm  B 32.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $37.95
  • Router Bit - 13.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut
    $48.50

    Router Bit - 13.0mm x 50.8mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank X/L Cut

    ConFit Australia

    (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for general plunging then normal side cutting.  Rememb...

    View full details
    $48.50
  • Router Bit - 14.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $39.50

    Router Bit - 14.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 14.0mm  B 32.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $39.50
  • Router Bit - 15.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank
    $39.50

    Router Bit - 15.0mm x 32.0mm Straight Bit - Two Flutes - (1/2") 12.7 x 38mm Shank

    ConFit Australia

    A 15.0mm  B 32.0mm   (1/2") 12.7 X 38mm Shank (1/2") 12.7 x 38mm shank used for general routing, grooving etc. Bottom of the bit is ground for gen...

    View full details
    $39.50
  • Router Bit - 16.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank - Tungsten Carbide End Cutting Tip
    $43.95

    Router Bit - 16.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank - Tungsten Carbide End Cutting Tip

    ConFit Australia

    A - 16.0mm Tungsten Carbide End Cutting Tip designed for mortise lock plunge jigs. Double flute bits are recommended for general routing, grooving ...

    View full details
    $43.95
  • Router Bit - 16.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank
    $32.00

    Router Bit - 16.0mm x 19.0mm Straight - Two Flutes - (1/4") 6.35 x 32mm Shank

    ConFit Australia

    A - 16.0mm B - 19.0mm Double flute bits are recommended for general routing, grooving and rebating etc. Bottom of the bit is ground for general plu...

    View full details
    $32.00