Skip to content

Filters

Products

  • Dual Check Valve 3/4" BSP Male x Female Watermarked Lead Free
    $28.95

    Dual Check Valve 3/4" BSP Male x Female Watermarked Lead Free

    ConFit Australia

    Dual Check valves are utilised for protection from cross contamination of non potable water with potable water. They are used in low hazard conditi...

    View full details
    $28.95
  • Dual Isolation Stop Capstan 1/4 Turn with Ceramic Disc 15 & 20mm Chrome Plated- Lead Free
    $19.95

    Dual Isolation Stop Capstan 1/4 Turn with Ceramic Disc 15 & 20mm Chrome Plated- Lead Free

    ConFit Australia

    Revised 28/07/2025

    $19.95
  • Dual Level Apex Reservoir Valve 32mm (1-1/4") Float Valve
    $217.36

    Dual Level Apex Reservoir Valve 32mm (1-1/4") Float Valve

    ConFit Australia

    Series Reservoir Valve is a high flow rate valve for controlling water flow into large tanks or maintaining a single water level within a tank or ...

    View full details
    $217.36
  • Dual Level Apex Reservoir Valve 40mm (1-1/2") Float Valve
    $236.92

    Dual Level Apex Reservoir Valve 40mm (1-1/2") Float Valve

    ConFit Australia

    Series Reservoir Valve is a high flow rate valve for controlling water flow into large tanks or maintaining a single water level within a tank or ...

    View full details
    $236.92
  • Dual Level Apex Reservoir Valve 50mm (2") Float Valve
    $258.24

    Dual Level Apex Reservoir Valve 50mm (2") Float Valve

    ConFit Australia

    Series Reservoir Valve is a high flow rate valve for controlling water flow into large tanks or maintaining a single water level within a tank or ...

    View full details
    $258.24
  • Dual Level Apex Reservoir Valve Service Kit
    $40.50

    Dual Level Apex Reservoir Valve Service Kit

    ConFit Australia

    Series Reservoir Valve is a high flow rate valve for controlling water flow into large tanks or maintaining a single water level within a tank or r...

    View full details
    $40.50
  • Dual Outlet Brass Hose Tap 3/4" BSP Outlets x 1/2" BSP Inlet Watermarked
    $25.50

    Dual Outlet Brass Hose Tap 3/4" BSP Outlets x 1/2" BSP Inlet Watermarked

    ConFit Australia

    Revised 27/06/2026

    $25.50
  • Dual Outlet Hose Tap 15mm x 15mm x 20mm Watermarked Chrome Plated - Lead Free
    Sold out
    $30.50

    Dual Outlet Hose Tap 15mm x 15mm x 20mm Watermarked Chrome Plated - Lead Free

    ConFit Australia

    Revised 15/09/2025

    $30.50
    Sold out
  • Durosil DS100 Neutral Silicone Sealant 300ml - Clear
    Sold out
    $11.50

    Durosil DS100 Neutral Silicone Sealant 300ml - Clear

    ConFit Australia

    Durosil DS 100 is a versatile, one component, 100% silicone sealant for sealing building joints and glazing systems and has excellent UV and weathe...

    View full details
    $11.50
    Sold out
  • Durosil DS100 Neutral Silicone Sealant 300ml - Steel Grey
    Sold out
    $11.50

    Durosil DS100 Neutral Silicone Sealant 300ml - Steel Grey

    ConFit Australia

    Durosil DS 100 is a versatile, one component, 100% silicone sealant for sealing building joints and glazing systems and has excellent UV and weathe...

    View full details
    $11.50
    Sold out
  • Durosil DS100 Neutral Silicone Sealant 300ml - White
    Sold out
    $11.50

    Durosil DS100 Neutral Silicone Sealant 300ml - White

    ConFit Australia

    Durosil DS 100 is a versatile, one component, 100% silicone sealant for sealing building joints and glazing systems and has excellent UV and weathe...

    View full details
    $11.50
    Sold out
  • Sold out
    $64.00

    Dust Bags for Tornado Dust Collector NK-125 Pack of 5 Bags

    ConFit Australia

    $64.00
    Sold out
  • Dust Shroud Only for Adjustable Hole Saw 40mm to 220mm Dust Shield Clear Acrylic Replacement for AHS220K Clear Acrylic
    $57.95

    Dust Shroud Only for Adjustable Hole Saw 40mm to 220mm Dust Shield Clear Acrylic Replacement for AHS220K Clear Acrylic

    ConFit Australia

    Note this is for the Dust Shroud only   Replacement dust shroud for AHS300K Impact resistant shroud with non-marking seal. Revised 19/05/2024

    $57.95
  • Dust Shroud Only for Adjustable Hole Saw 40mm to 300mm Dust Shield Clear Acrylic Replacement for AHS300K Clear Acrylic
    $87.95

    Dust Shroud Only for Adjustable Hole Saw 40mm to 300mm Dust Shield Clear Acrylic Replacement for AHS300K Clear Acrylic

    ConFit Australia

    Note this is for the Dust Shroud only Replacement dust shroud for AHS220K Impact resistant shroud with non-marking seal. Revised 19/05/2024  

    $87.95
  • DWV Slab Adaptor Female x Female 50mm AS1260 Plumbing
    $3.50

    DWV Slab Adaptor Female x Female 50mm AS1260 Plumbing

    ConFit Australia

    Upgrade your plumbing system with this PVC DWV Slab Adaptor Female x Female.  Made from high-quality PVC material, this adapter is designed to pro...

    View full details
    $3.50
  • Dymaxion 100mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc - 25 Pack
    $45.50

    Dymaxion 100mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc - 25 Pack

    ConFit Australia

    Revised 24/05/2026

    $45.50
  • Dymaxion 115mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc - 5 Pack
    $12.00

    Dymaxion 115mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc - 5 Pack

    ConFit Australia

    Revised 24/05/2026

    $12.00
  • Dymaxion 125mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc
    $2.50

    Dymaxion 125mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc

    ConFit Australia

    Revised 24/05/2026

    $2.50
  • Dymaxion 180mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc
    $4.95

    Dymaxion 180mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc

    ConFit Australia

    Revised 24/05/2026

    $4.95
  • Dymaxion 230mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc - 10 Pack
    $66.50

    Dymaxion 230mm Ferrous and Stainless Steel (INOX) Metal Cutting Disc - 10 Pack

    ConFit Australia

    Revised 24/05/2026

    $66.50
  • Dymaxion 305mm Steel Cutting Low Speed Stationery Cut Off Wheel - 5 Pack
    $57.50

    Dymaxion 305mm Steel Cutting Low Speed Stationery Cut Off Wheel - 5 Pack

    ConFit Australia

    Revised 24/05/2026

    $57.50
  • Dymaxion 355mm Steel Cutting Low Speed Stationery Cut Off Wheel - 5 Pack
    $73.50

    Dymaxion 355mm Steel Cutting Low Speed Stationery Cut Off Wheel - 5 Pack

    ConFit Australia

    Revised 24/05/2026

    $73.50
  • Dymaxion 8 Piece HSS Hole Saw Kit for Cutting Metal
    $249.95

    Dymaxion 8 Piece HSS Hole Saw Kit for Cutting Metal

    ConFit Australia

    ELECTRICAL: HVAC: DATA CABELING: PLUMBING This 8 piece kit is manufactured from the same high grade M2 H.S.S. steel as the HMHT range.  Each hole s...

    View full details
    $249.95
  • Dymaxion 95mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $108.00

    Dymaxion 95mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods show...

    View full details
    $108.00
  • Dymaxion Aluminium Milling Blade/Milling Wheel - Fine Weight U Slot 100 x 16mm Bore 4 Teeth 2.3 Kerf
    $34.50

    Dymaxion Aluminium Milling Blade/Milling Wheel - Fine Weight U Slot 100 x 16mm Bore 4 Teeth 2.3 Kerf

    ConFit Australia

    For Aluminium milling, grooving, cutting and weld preparation. Hardened steel blade body. Premium tungsten carbide cutting tips.   Revised 3/05/2026

    $34.50
  • Dymaxion Aluminium Milling Blade/Milling Wheel - Fine Weight U Slot 115 x 22mm Bore 4 Teeth 2.3 Kerf
    $36.50

    Dymaxion Aluminium Milling Blade/Milling Wheel - Fine Weight U Slot 115 x 22mm Bore 4 Teeth 2.3 Kerf

    ConFit Australia

    For Aluminium milling, grooving, cutting and weld preparation. Hardened steel blade body. Premium tungsten carbide cutting tips.   Revised 3/05/2026

    $36.50
  • Dymaxion Aluminium Milling Blade/Milling Wheel - Medium 115 x 22mm Bore 24 Teeth 2.6 Kerf
    $38.95

    Dymaxion Aluminium Milling Blade/Milling Wheel - Medium 115 x 22mm Bore 24 Teeth 2.6 Kerf

    ConFit Australia

    For Aluminium milling, grooving, cutting and weld preparation. Hardened steel blade body. Premium tungsten carbide cutting tips.   Revised 8/05/2026

    $38.95
  • Dymaxion Aluminium Milling Blade/Milling Wheel - Triple Chip 115mm x 22mm Bore 24 Teeth 3.8mm Kerf
    Sold out
    $91.50

    Dymaxion Aluminium Milling Blade/Milling Wheel - Triple Chip 115mm x 22mm Bore 24 Teeth 3.8mm Kerf

    ConFit Australia

    For Aluminium milling, grooving, cutting and weld preparation. Hardened steel blade body. Premium tungsten carbide cutting tips.   Revised 3/05/2026

    $91.50
    Sold out
  • Dymaxion Chisel SDS Max 350mm Point Blade Joint/Mortar Restoration
    $38.50

    Dymaxion Chisel SDS Max 350mm Point Blade Joint/Mortar Restoration

    ConFit Australia

    Ideal for heavy duty demolition and joint/mortar restoration. For use in concrete, stone, brick and mortar. Constructed from hard wearing tool stee...

    View full details
    $38.50
  • Dymaxion Chisel SDS Plus 20mm x 250mm Flat Blade Heavy Duty Demolition and Joint/Mortar Restoration
    $21.95

    Dymaxion Chisel SDS Plus 20mm x 250mm Flat Blade Heavy Duty Demolition and Joint/Mortar Restoration

    ConFit Australia

    Ideal for heavy duty demolition and joint/mortar restoration. For use in concrete, stone, brick and mortar. Constructed from hard wearing tool stee...

    View full details
    $21.95
  • Dymaxion Chisel SDS Plus 250mm Point Blade Joint/Mortar Restoration
    $20.95

    Dymaxion Chisel SDS Plus 250mm Point Blade Joint/Mortar Restoration

    ConFit Australia

    Ideal for heavy duty demolition and joint/mortar restoration. For use in concrete, stone, brick and mortar. Constructed from hard wearing tool stee...

    View full details
    $20.95
  • Dymaxion Chisel SDS Plus 7mm Blade Thickness x 26mm W x 250mm L Slotting Chisel
    $32.50

    Dymaxion Chisel SDS Plus 7mm Blade Thickness x 26mm W x 250mm L Slotting Chisel

    ConFit Australia

    Purpose designed for the rapid removal of mortar between bricks. Effectively chisels away stubborn mortar. Constructed from hard wearing tool steel...

    View full details
    $32.50
  • Dymaxion Chisel SDS Plus 8mm Blade Thickness x 15mm Wide x 200mm Long Mortar Rake
    $29.50

    Dymaxion Chisel SDS Plus 8mm Blade Thickness x 15mm Wide x 200mm Long Mortar Rake

    ConFit Australia

    Cranked shaft chisel which is purpose designed not to dive-in to mortar likes. Effectively chisels away stubborn mortar. The cranked shaft allows f...

    View full details
    $29.50
  • Dymaxion Chisel SDS Plus Long Cranked Flat Blade 40mm Wide x 300mm Long
    $30.50

    Dymaxion Chisel SDS Plus Long Cranked Flat Blade 40mm Wide x 300mm Long

    ConFit Australia

    Cranked (angled) flat chisels are ideal for removing tiles and similar products. The angled chisel head reduces operator fatigue by allowing a mor...

    View full details
    $30.50
  • Dymaxion Chisel SDS Plus Scoop Blade 250mm Mortar Channelling
    $37.50

    Dymaxion Chisel SDS Plus Scoop Blade 250mm Mortar Channelling

    ConFit Australia

    Designed for creating (gouging) channels in mortar and masonry. Constructed from hard wearing tool steel for a long service life. Easily resharpene...

    View full details
    $37.50
  • Sold out
    $591.00

    Dymaxion Concrete Grinder 125mm

    ConFit Australia

    $591.00
    Sold out