Products

22mm V Grooving Bits (90o & 60o)  1/2" Shank Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign w...

32mm V Grooving Bits (90o & 60o)  1/4" Shank Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign w...

50mm V Grooving Bits (90o & 60o)   Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and ge...

60o V Grooving Bits   1/2" Shank Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and general ...

9.5mm V Grooving Bits (90o & 60o)   Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and g...

A - 3.2mm B - 8.0mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits...

Radius - 5.5mm A - 25.4mm B - 16.0mm Revised 5/05/2024

A - 12.7mm B - 9.5mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bi...

A - 19mm B - 16mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bits. ...

A - 25.4mm B - 16mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bit...

Radius - 2.4mm A - 12.7mm B - 9.5mm Revised 5/05/2024

A - 4.8mm B - 8.0mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box ...

A - 6.4mm B - 6.4mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bit...

Radius - 4.0mm A - 19.0mm B - 12.7mm Revised 5/05/2024

A - 9.5mm B - 9.5mm Small dia. bits are called Veining bits which cut shallow grooves on board surface. 6mm wide and over are called Core Box Bit...

A 12.7mm  B 9.5mm   Revised 6/05/2024

A 12.7mm  B 25.4mm   Revised 6/05/2024

A 12.7mm  B 12.7mm  Surface reeding and lettering using top template   Revised 6/05/2024

A 16.0mm  B 25.4mm   Revised 6/05/2024

A 19.0mm  B 50.0mm   Revised 6/05/2024

A 28.6mm  B 38.0mm   Revised 6/05/2024

A 22.0mm  B 9.9mm Radius 3.2mm Surface groove can be widened to give better proportional groove to the face of the job. Revised 6/05/2024

A 22.0mm  B 12.7mm Rad 1 4.0mm Rad 2 5.5mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cutt...

A 35.0mm  B 14.3mm Radius 5.5mm Surface groove can be widened to give better proportional groove to the face of the job. Revised 6/05/2024

A 35.0mm  B 14.3mm Rad 1 6.4mm Rad 2 10.0mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cut...

A 19.0mm  B 38.1mm 1/2" Shank Specifically designed for heavy duty, fast, clean cutting which gives a superior finish with  minimal chipping to to...

A 28.0mm  B 19.0mm 1/2" Shank This bit has a 10mm flat on the point for large top bearing guided signage Revised 6/05/2024

39mm V Grooving Bits (90o & 60o)  Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and gen...

Point 3.2mm Radius 3.2mm  A 9.5mm  B 9.5mm Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

Point 12.7mm Radius 3.2mm  A 19.0mm  B 11.1mm - Flat Bottom Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

Point 12.7mm Radius 6.4mm  A 25.4mm  B 19.0mm  Broad/Wide point beading  Can plunge and cut into the surface Revised 6/05/2024

 Designed to plunge and cut an open top ball track after using a straight cutter to relieve the centre just larger than the shank size of the track...

Edge and Face Forming Bits Ogee Bits Standard A 24.0mm  B 15.0mm  Radius 4.8mm  E 4.8mm   Revised 6/05/2024

Edge and Face Forming Bits Ogee Bits Wide Point Used to rout the face of panel doors etc A 31.0mm  B 15.0mm  Radius 4.8mm  E 13.0mm   Revised 6/05/...

Sectional edge moulding and used extensively for male and female sections of Roll Top desks.   A 25.4mm  B 16.0mm  Radius 3.2mm   Revised 6/05/2...

Edge and Face Forming Bits Ogee Bits Fine Point Used in Router Lathe Work A 27.0mm  B 16.0mm  Radius 6.5mm  E 1.0mm   Revised 6/06/2024

Edge and Face Forming Bits Ogee Bits Standard A 31.0mm  B 16.0mm  Radius 6.5mm  E 4.8mm   Revised 6/05/2024

Edge and Face Forming Bits Ogee Bits Wide Point Used to rout the face of panel doors etc A 38.0mm  B 19.0mm  Radius 6.5mm  E 13.0mm   Revised 6/06...

A 32mm  B 12.7mm  Radius 6.4mm   Revised 6/05/2024

Edge and Face Forming Bits Ogee Bits Fine Point Used in Router Lathe Work A 21.0mm  B 15.0mm  Radius 4.8mm  E 1.0mm   Revised 6/05/2024