Products

Radius 9.5mm  A 32mm  B 16mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they c...

Radius 9.5mm  A 32mm  B 16mm   The beading bit is used to produce a professional edge on the job with ease. These bits are very versatile as they c...

Radius 9.5mm A 28.6mm  B 12.7mm   Cove Bits are used for decorative edging and drop leaf table joints.   Revised 9/05/2024     

Radius 9.5mm A 54.0mm  B 25.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Radius 9.5mm A 54.0mm  B 25.0mm   Traditionally the ogee bit routs through the surface of the job.  These ball bearing guided bits follow the conto...

Rabbeting bits cut fast accurate rabbet joints which are seen in the draw  front and rear inlet sections in the backs of picture and mirror frames,...

Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

Rounding Over Bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as cuttin...

8,9.5,11,12.7 Rabbeting Set1/2 Rabbeting bits cut fast accurate rabbet joints which are seen in the draw  front and rear inlet sections in...

B 32.0mm A 57.2mm  E 22.5mm   45o Chamfering bits are can be used just to break the edge or produce a full decorative cut. By fitting a smaller bea...

Radius 3.2mm A 25.4mm  B 12.7mm   This bit produces a combination of convex step concave and step or part there of.  No step.   Revised 9/05/2024

Radius 3.2mm A 25.4mm  B 12.7mm   This bit produces a combination of convex step concave and step or part there of.  Small Bearing produces a step...

Radius 4.8mm A 32.0mm  B 14.3mm   This bit produces a combination of convex step concave and step or part there of.  No step.   Revised 9/05/2024

Radius 4.8mm A 32.0mm  B 14.3mm   This bit produces a combination of convex step concave and step or part there of.  Small Bearing produces a step...

4mm Roman Ogee Router Bit Radius 4.0 A - 30mm B - 12mm The Roman Ogee bit is widely used on production of fine furniture. This bit provides a conv...

Radius 6.4mm A 38.0mm  B 17.5mm   This bit produces a combination of convex step concave and step or part there of.  No step. Revised 9/05/2024  

Radius 6.4mm A 38.0mm  B 17.5mm   This bit produces a combination of convex step concave and step or part there of.  Small Bearing produces a step...

6.4mm Roman Ogee Router Bit Radius 6.4 A - 35mm B - 17mm C - 1/2" Shank The Roman Ogee bit is widely used on production of fine furniture. This bi...

6.4mm Roman Ogee Router Bit Radius 6.4 A - 35mm B - 17mm The Roman Ogee bit is widely used on production of fine furniture. This bit provides a co...

9.5mm Roman Ogee Router Bit Radius 9.5 A - 51mm B - 25mm The Roman Ogee bit is widely used on production of fine furniture. This bit provides a co...