Skip to content

Filters

Products

  • Edge & Face Forming Bit Top Bearing- 6.4mm Classical Plunge Top Guide - TruaCut
    $71.50

    Edge & Face Forming Bit Top Bearing- 6.4mm Classical Plunge Top Guide - TruaCut

    ConFit Australia

    A 35.0mm  B 14.3mm Rad 1 6.4mm Rad 2 10.0mm Surface Classical plunge bit used on doors & draw fronts and draws.  Can also be used for edge cut...

    View full details
    $71.50
  • Edge & Face Forming Bit Top Bearing- Inverted Down Shear Flush Trim - 1/2" Shank - TruaCut
    $55.50

    Edge & Face Forming Bit Top Bearing- Inverted Down Shear Flush Trim - 1/2" Shank - TruaCut

    ConFit Australia

    A 19.0mm  B 38.1mm 1/2" Shank Specifically designed for heavy duty, fast, clean cutting which gives a superior finish with  minimal chipping to to...

    View full details
    $55.50
  • Edge & Face Forming Bit Top Bearing- V Lettering - 1/2" Shank - TruaCut
    $110.50

    Edge & Face Forming Bit Top Bearing- V Lettering - 1/2" Shank - TruaCut

    ConFit Australia

    A 28.0mm  B 19.0mm 1/2" Shank This bit has a 10mm flat on the point for large top bearing guided signage Revised 6/05/2024

    $110.50
  • Edge & Face Forming Bits - 39mm V Grooving Router Bit - TruaCuT
    $59.95

    Edge & Face Forming Bits - 39mm V Grooving Router Bit - TruaCuT

    ConFit Australia

    39mm V Grooving Bits (90o & 60o)  Designed for V grooving cuts to replicate random groove timber panel construction, letter, sign work and gen...

    View full details
    $59.95
  • Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit - TruaCuT
    $72.95

    Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit - TruaCuT

    ConFit Australia

    Point 3.2mm Radius 3.2mm  A 9.5mm  B 9.5mm Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

    $72.95
  • Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit Flat Bottom- TruaCuT
    $79.95

    Edge & Face Forming Bits - Router Bit - 3.2mm Broad/Wide Point Beading Bit Flat Bottom- TruaCuT

    ConFit Australia

    Point 12.7mm Radius 3.2mm  A 19.0mm  B 11.1mm - Flat Bottom Broad/Wide point beading  Can plunge and cut into the surface   Revised 6/05/2024

    $79.95
  • Edge & Face Forming Bits - Router Bit - 6.4mm x 25mmBroad/Wide Point Beading Bit - TruaCuT
    $85.95

    Edge & Face Forming Bits - Router Bit - 6.4mm x 25mmBroad/Wide Point Beading Bit - TruaCuT

    ConFit Australia

    Point 12.7mm Radius 6.4mm  A 25.4mm  B 19.0mm  Broad/Wide point beading  Can plunge and cut into the surface Revised 6/05/2024

    $85.95
  • TruaCut Edge and Face Forming Bits - 25.4mm Ball / Rope Track Bit
    $80.50

    TruaCut Edge and Face Forming Bits - 25.4mm Ball / Rope Track Bit

    ConFit Australia

     Designed to plunge and cut an open top ball track after using a straight cutter to relieve the centre just larger than the shank size of the track...

    View full details
    $80.50
  • TruaCut Edge and Face Forming Bits - 4.8mm Ogee Bits Standard
    $81.50

    TruaCut Edge and Face Forming Bits - 4.8mm Ogee Bits Standard

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Standard A 24.0mm  B 15.0mm  Radius 4.8mm  E 4.8mm   Revised 6/05/2024

    $81.50
  • TruaCut Edge and Face Forming Bits - 4.8mm Ogee Bits Wide Point
    $84.50

    TruaCut Edge and Face Forming Bits - 4.8mm Ogee Bits Wide Point

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Wide Point Used to rout the face of panel doors etc A 31.0mm  B 15.0mm  Radius 4.8mm  E 13.0mm   Revised 6/05/...

    View full details
    $84.50
  • TruaCut Edge and Face Forming Bits - 6.4mm Bead and Flute Bit - Used for Roll Top Desks
    $132.50

    TruaCut Edge and Face Forming Bits - 6.4mm Bead and Flute Bit - Used for Roll Top Desks

    ConFit Australia

    Sectional edge moulding and used extensively for male and female sections of Roll Top desks.   A 25.4mm  B 16.0mm  Radius 3.2mm   Revised 6/05/2...

    View full details
    $132.50
  • TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Fine Point For Router Lathe Work
    $98.95

    TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Fine Point For Router Lathe Work

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Fine Point Used in Router Lathe Work A 27.0mm  B 16.0mm  Radius 6.5mm  E 1.0mm   Revised 6/06/2024

    $98.95
  • TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Standard
    $95.95

    TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Standard

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Standard A 31.0mm  B 16.0mm  Radius 6.5mm  E 4.8mm   Revised 6/05/2024

    $95.95
  • TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Wide Point
    $98.95

    TruaCut Edge and Face Forming Bits - 7mm Ogee Bits Wide Point

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Wide Point Used to rout the face of panel doors etc A 38.0mm  B 19.0mm  Radius 6.5mm  E 13.0mm   Revised 6/06...

    View full details
    $98.95
  • TruaCut Edge and Face Forming Bits - Dish and Bowl Carving Bit
    $56.95

    TruaCut Edge and Face Forming Bits - Dish and Bowl Carving Bit

    ConFit Australia

    A 32mm  B 12.7mm  Radius 6.4mm   Revised 6/05/2024

    $56.95
  • TruaCut Edge and Face Forming Bits -4.8mm Ogee Bits Fine Point For Router Lathe Work
    $81.50

    TruaCut Edge and Face Forming Bits -4.8mm Ogee Bits Fine Point For Router Lathe Work

    ConFit Australia

    Edge and Face Forming Bits Ogee Bits Fine Point Used in Router Lathe Work A 21.0mm  B 15.0mm  Radius 4.8mm  E 1.0mm   Revised 6/05/2024

    $81.50