Skip to content

Grinding and Cutting

  • Masonry Hole Saws Tungsten Carbide Tip for Brick and Masonry -  Air Con Kit Adaptor and 65mm Bit
    $77.95

    Masonry Hole Saws Tungsten Carbide Tip for Brick and Masonry - Air Con Kit Adaptor and 65mm Bit

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods shown b...

    View full details
    $77.95
  • TruaCut Vacuum Brazed Diamond Router Bits -Straight Bit - 10 x 40mm - 40/50 Grit
    $61.95

    TruaCut Vacuum Brazed Diamond Router Bits -Straight Bit - 10 x 40mm - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. Granite, marble, natural & synthet...

    View full details
    $61.95
  • TruaCut Vacuum Brazed Diamond Router Bits - 6.4mm Rounding Over Bit
    $67.50

    TruaCut Vacuum Brazed Diamond Router Bits - 6.4mm Rounding Over Bit

    ConFit Australia

    Rounding Over Bits 60/70 Diamond Grit   Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products...

    View full details
    $67.50
  • TruaCut Vacuum Brazed Diamond Router Bits -Straight Bit - 6.4 x 25mm - 40/50 Grit
    $51.95

    TruaCut Vacuum Brazed Diamond Router Bits -Straight Bit - 6.4 x 25mm - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $51.95
  • Wire Wheel Crimped for Bench Grinders 150mm x 25mm
    $31.50

    Wire Wheel Crimped for Bench Grinders 150mm x 25mm

    ConFit Australia

    Wire Wheel Crimped 150mm x 25mm  CRIMPED WIRE WHEELS FOR BENCH GRINDERSCrimped wire wheels are less aggressive than twist knot brushes. Removes rus...

    View full details
    $31.50
  • TRUACUT MULTI TOOL BLADE - CARBIDE GRIT - MASONRY - DEEP CUT - 32MM W x 55MM D
    $18.50

    TRUACUT MULTI TOOL BLADE - CARBIDE GRIT - MASONRY - DEEP CUT - 32MM W x 55MM D

    ConFit Australia

    TruaCut Multi Tool Blade - Suits 99% of Multi Tools Carbide Grit Masonry - Deep Cut 32mm Width 55mm Depth Revised 27/05/2024

    $18.50
  • Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 220mm Long M22 Thread
    $32.50

    Hole Saws Tungsten Carbide Tipped for Masonry & Brick - Adaptor SDS Plus 220mm Long M22 Thread

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry.  M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

    View full details
    $32.50
  • TruaCut PCF Fibre Cement Cutting Blade 125mm Dia x 22.2mm Bore x 4 Teeth
    $130.00

    TruaCut PCF Fibre Cement Cutting Blade 125mm Dia x 22.2mm Bore x 4 Teeth

    ConFit Australia

    Polycrystalline Diamond Saw Blade   Revised 20/05/2024  

    $130.00
  • TruaCut Vacuum Brazed Diamond Router Bits - 4.0mm Rounding Over Bit
    $60.95

    TruaCut Vacuum Brazed Diamond Router Bits - 4.0mm Rounding Over Bit

    ConFit Australia

    Rounding Over Bits 60/70 Diamond Grit Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products. ...

    View full details
    $60.95
  • TruaCut Vacuum Brazed Diamond Router Bits -Flush Trim Bit - 12.7mm Dia x 38mm - 60/70 Grit
    $63.50

    TruaCut Vacuum Brazed Diamond Router Bits -Flush Trim Bit - 12.7mm Dia x 38mm - 60/70 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $63.50
  • TRUACUT MULTI TOOL BLADE - CARBIDE GRIT- MASONRY CORNER EATER -  32MM W x 40MM D 3
    $21.50

    TRUACUT MULTI TOOL BLADE - CARBIDE GRIT- MASONRY CORNER EATER - 32MM W x 40MM D 3

    ConFit Australia

    TruaCut Multi Tool Blade - Suits 99% of Multi Tools Carbide Grit Masonry Corner Eater - Pointed Nose 32mm Width Down to Point 40mm Depth...

    View full details
    $21.50
  • Core Drill Accessories - Adaptor HEX 85mm Long 1/2" BSP  Thread - Widest Diameter 25mm
    $33.50

    Core Drill Accessories - Adaptor HEX 85mm Long 1/2" BSP Thread - Widest Diameter 25mm

    ConFit Australia

    This is the range of accessories needed to attach all short series core drill bits onto the power drill including CCSB and CBTB ranges and any prod...

    View full details
    $33.50
  • TruaCut Vacuum Brazed Diamond Router Bits - 3.2mm Rounding Over Bit
    $59.50

    TruaCut Vacuum Brazed Diamond Router Bits - 3.2mm Rounding Over Bit

    ConFit Australia

    Rounding Over Bits 60/70 Diamond Grit   Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products...

    View full details
    $59.50
  • Internal Pipe Cutter 100mm long 50mm dia Diamond Blade Plumbing
    $27.95

    Internal Pipe Cutter 100mm long 50mm dia Diamond Blade Plumbing

    ConFit Australia

    Pipe cutters allow the user to cut PVC pipes off square and clean below the surface level. These are useful for Plumbing, Tiling and Electrical tra...

    View full details
    $27.95
  • Diamond Blade Turbo for Brick and Natural Limestone 200mm x 30mm Bore
    $83.50

    Diamond Blade Turbo for Brick and Natural Limestone 200mm x 30mm Bore

    ConFit Australia

    These diamond segments are designed to give the best performance in cutting clay bricks and natural limestone. These diamond blades will NOT cut co...

    View full details
    $83.50
  • Diamond Blade Segmented for Cutting Concrete/Brick/Paving 150mm x 22mm Bore
    $41.50

    Diamond Blade Segmented for Cutting Concrete/Brick/Paving 150mm x 22mm Bore

    ConFit Australia

    These diamond segments are designed to give the best performance in concrete cutting. Also use for cement based bricks and pavers. Suitable for wal...

    View full details
    $41.50
  • Diamond Blade Segmented for Cutting Concrete/Brick/Paving 200mm x 30mm Bore
    $83.50

    Diamond Blade Segmented for Cutting Concrete/Brick/Paving 200mm x 30mm Bore

    ConFit Australia

    These diamond segments are designed to give the best performance in concrete cutting. Also use for cement based bricks and pavers. Suitable for wal...

    View full details
    $83.50
  • Turbo Diamond Core Drill Bit for Brick 1/2" BSP 65mm Dia x 160mm Length
    $94.95

    Turbo Diamond Core Drill Bit for Brick 1/2" BSP 65mm Dia x 160mm Length

    ConFit Australia

    Tips to prevent damage to the diamond segments –  do not operate on hammer action, do not force the speed of the cut, some bricks are harder and de...

    View full details
    $94.95
  • Dymaxion Aluminium Milling Blade/Milling Wheel - Triple Chip 115mm x 22mm Bore 24 Teeth 3.8mm Kerf
    $83.50

    Dymaxion Aluminium Milling Blade/Milling Wheel - Triple Chip 115mm x 22mm Bore 24 Teeth 3.8mm Kerf

    ConFit Australia

    For Aluminium milling, grooving, cutting and weld preparation. Hardened steel blade body. Premium tungsten carbide cutting tips.   Revised 23/05/2024

    $83.50
  • 80mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry
    $80.95

    80mm Masonry Hole Saw Tungsten Carbide Tip for Brick and Masonry

    ConFit Australia

    TUNGSTEN CARBIDE TIPPED MASONRY HOLE SAWS Used for brick & masonry. M22 fine thread adaptor. Internal core depth 50mm. Use adaptor rods...

    View full details
    $80.95
  • TruaCut PCF Fibre Cement Cutting Blade 210mm Dia x 30mm Bore x 6 Teeth
    $196.00

    TruaCut PCF Fibre Cement Cutting Blade 210mm Dia x 30mm Bore x 6 Teeth

    ConFit Australia

    Polycrystalline Diamond Saw Blade   Revised 20/05/2024  

    $196.00
  • TruaCut Vacuum Brazed Diamond Router Bits -Chamfering Bit - 12mm Depth of Cut - 60/70 Grit
    $90.50

    TruaCut Vacuum Brazed Diamond Router Bits -Chamfering Bit - 12mm Depth of Cut - 60/70 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $90.50
  • TruaCut Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 17mm  Depth of Cut - 40/50 Grit
    $77.50

    TruaCut Vacuum Brazed Diamond Router Bits -Vee Grooving Bit - 17mm Depth of Cut - 40/50 Grit

    ConFit Australia

    Stanley TruaCuT Vacuum Brazed Diamond Router Bits are used for routing shapes into masonry products.  Granite, marble, natural & synthe...

    View full details
    $77.50